Any one got or know where I can get the light holders for our clocks. I have a few Amp, Oil Pressure and clock/time to go in and have no light holders for them.
| ausmini https://www.ausmini.com/forums/ |
|
| Dash Lights https://www.ausmini.com/forums/viewtopic.php?f=2&t=2017 |
Page 1 of 1 |
| Author: | gafmo [ Fri Sep 24, 2004 8:07 am ] |
| Post subject: | Dash Lights |
Any one got or know where I can get the light holders for our clocks. I have a few Amp, Oil Pressure and clock/time to go in and have no light holders for them.
|
|
| Author: | drmini in aust [ Fri Sep 24, 2004 8:08 am ] |
| Post subject: | |
Go find a pommy car at the wreckers- most have the same bulb holder. 
|
|
| Author: | gafmo [ Fri Sep 24, 2004 8:19 am ] |
| Post subject: | |
Non down at Pick and pay less on Tuesday. JAM and I intened on going back on Saturday afternoon so well have another look then. The othere thing is on Marcia Loom which is all out some of the dash lights are fried and the wire needs replacing. The cassing if fine but inside is a little metal pad attached to the wire. I guess I could just put a big glob of solder on it or do you thing Autoelectonic may have them |
|
| Author: | Wombat [ Fri Sep 24, 2004 8:33 am ] |
| Post subject: | |
Parts can be bought here http://www.vinwire.com.au/accessories.htm |
|
| Author: | gafmo [ Fri Sep 24, 2004 8:40 am ] |
| Post subject: | |
Yer $3 each. They were not able help me last time I emailed them so I'll try the Pick and pay less again, Maybe I can get them for free again. Cheers wombat for the reminder in Vinwires. and I'll be putting the regulator in at the same time now. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|