Trolling Fleabay and found this - the oil filter looks very different that what I am used to and lots of smaller differences...
Hooroo
Rob Forsyth
Miniot!!
| ausmini https://www.ausmini.com/forums/ |
|
| Havent Seen One Like This Before... https://www.ausmini.com/forums/viewtopic.php?f=2&t=20861 |
Page 1 of 1 |
| Author: | CPOCSM [ Thu Jul 06, 2006 8:40 pm ] |
| Post subject: | Havent Seen One Like This Before... |
Trolling Fleabay and found this - the oil filter looks very different that what I am used to and lots of smaller differences...
Hooroo Rob Forsyth Miniot!! |
|
| Author: | Bromley [ Thu Jul 06, 2006 8:42 pm ] |
| Post subject: | |
WT???? Never seen that before either. |
|
| Author: | Morris 1100 [ Thu Jul 06, 2006 8:45 pm ] |
| Post subject: | |
Yeah, I have an A+ like that. 
|
|
| Author: | CPOCSM [ Thu Jul 06, 2006 8:48 pm ] |
| Post subject: | |
Morris 1100 wrote: Yeah, I have an A+ like that.
What I would give for the oil filter to be that easy but imagine cleaning off the sheet of oil from the motor every time you changed the oil... Looks good though Hooroo Rob Forsyth Miniot!! |
|
| Author: | Morris 1100 [ Thu Jul 06, 2006 9:24 pm ] |
| Post subject: | |
Knock a hole in the filter with a screwdriver and let the oil run back into the engine.
My A+ has a different crank and a different sump. |
|
| Author: | Hanra [ Thu Jul 06, 2006 9:26 pm ] |
| Post subject: | |
A+ aint it? |
|
| Author: | drmini in aust [ Thu Jul 06, 2006 9:37 pm ] |
| Post subject: | |
Late A+, there's no dizzy hole...
|
|
| Author: | 9YaTaH [ Thu Jul 06, 2006 9:47 pm ] |
| Post subject: | and... |
Morris 1100 wrote: Knock a hole in the filter with a screwdriver and let the oil run back into the engine.
My A+ has a different crank and a different sump. Loosen the filter, Knock a hole in the filter with a screwdriver, turn the filter so hole faces down, catch leaking oil in container.....no mess oil change  
|
|
| Author: | sports850 [ Thu Jul 06, 2006 9:59 pm ] |
| Post subject: | |
Iwas going to say South African till I saw the oil filter wasn't angled to the block (still the same spot) and there was no dizzy hole . Late model A plus with the little electronic ignition module that runs from signals off the crank . |
|
| Author: | minicranks [ Fri Jul 07, 2006 6:42 am ] |
| Post subject: | |
single or twin point injection. welcome to the 21st century guys. they are not that great being A+ and all. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|