Hi i have found some arches i think option is either carbon fiber or fiberglass which one and why
price is more for thr CF ones but if they are worth it then i will pay
| ausmini https://www.ausmini.com/forums/ |
|
| Arches Carbon Fiber or Fiberglass https://www.ausmini.com/forums/viewtopic.php?f=2&t=20937 |
Page 1 of 1 |
| Author: | marcsvenson [ Sun Jul 09, 2006 9:34 pm ] |
| Post subject: | Arches Carbon Fiber or Fiberglass |
Hi i have found some arches i think option is either carbon fiber or fiberglass which one and why price is more for thr CF ones but if they are worth it then i will pay
|
|
| Author: | rampage101 [ Sun Jul 09, 2006 9:55 pm ] |
| Post subject: | |
If your just going to paint them, then I'd say go the fibreglass, otherwise CF. |
|
| Author: | NoMoreMinis [ Sun Jul 09, 2006 10:34 pm ] |
| Post subject: | |
got a pic?? i like the sound of CF arches 
|
|
| Author: | Hanra [ Sun Jul 09, 2006 10:35 pm ] |
| Post subject: | |
In some cases the fibreglass 1's are not always a perfect fit. At least u can kinda work em to fit, ie: sanding/cutting/re-glassing. Dunno how u would go shaping CF ones.......? |
|
| Author: | mini_matt [ Mon Jul 10, 2006 8:19 am ] |
| Post subject: | arches |
plus if you want the carbon fibre look theres a place that will do it on the fibreglass for you |
|
| Author: | Metalfab_101 [ Mon Jul 10, 2006 9:30 am ] |
| Post subject: | |
Waiting for Tricky to chime in on this one... |
|
| Author: | marcsvenson [ Mon Jul 10, 2006 1:47 pm ] |
| Post subject: | |
yeah i think its the fiberglass ones then cheers |
|
| Author: | Razor [ Mon Jul 10, 2006 5:14 pm ] |
| Post subject: | |
where can you get carbon fibre ones? |
|
| Author: | buztoy [ Mon Jul 10, 2006 6:56 pm ] |
| Post subject: | |
use fibre glass, unless you want the carbon fibre look, most people think cf is brittle, its only brittle when you have the axes of forces facing each other, ie, on a straight peice of cf, side a is pushing towards side b. when you add up the cost f/g is less than $7 per m*2 vs cf which is $32 per m*2, |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|