My mini door locks wont lock the door they are broken would a auto locksmith be the best place to go from new locks?

Ian

_________________
Ian - My Ve SSV Ute - Looking for a Mini

Ian

Pull the door trims off and get some one to lock the door from both inside and outside while you watch what is happening and whats not. Its a mechanical thing and may just need an adjustment.

If the key part is not working then it may need a locksmith but the last lockie I went to just said buy a newer car so I just smiled and nodded at him while inside I wished that he already had had his very last BJ. There is no crueler punishment.

yeah it is probly mostly mechaincal. i had the same kinda problem with mine, just fiddle around and see whats what. what what.

_________________

Sunday Morning Mini Sprint http://www.youtube.com/watch?v=UtGuzqBQ32Q my "rendezvous"

if they want a key number my lock smith said it was only on the door lock it is also on the boot lock easier number to find and he told me it wasnt there

a friend of mine went to link automotive and they recomended and fitted door locks from a toyota camry. they look a fair bit like the originals and work really well. not sure about how much it cost

_________________
real men race downhill - keiichi tsuchiya

Very interesting. I assume they would be the 80's Camry?

sorry im not sure what year they are from. you cn give them a call or email. just search for link automotive on google. speak to bryan or peter, both really helpfull guys

_________________
real men race downhill - keiichi tsuchiya

hey guys im a locksmith and have done door lock conversions using mazda / laser door locks on a clubby and they can be keyed the same as the ignition, they also have 8 tumblers, mini has 5 so its harder to pick or open with a screwdriver

PM and i can give details if needed

_________________
with the fury of a Monkey Dishwasher aimed at your Purple

57 Morris minor
88 Rover Mini

is it possible to get the original mini locks re-keyed to be the same as the ignition? cos the door locks are quite shallow

not on the clubman models the ignition is different

_________________
with the fury of a Monkey Dishwasher aimed at your Purple

57 Morris minor
88 Rover Mini

how about the earlier minis, ie 65

I would like to do this.

_________________
Ryan Filippi
Minis In The Gong
[email protected]
www.minisinthegong.com.au

yes they can , pretty sure they are meant to be from new

_________________
with the fury of a Monkey Dishwasher aimed at your Purple

57 Morris minor
88 Rover Mini

Yeah they were from new, but as mine has been changed only the boot and ignition are keyed the same, i would like to get the door changed. How do i go about getting this done?
Can someone come to me to do it? do i have to take the lock out of the door?

_________________
Ryan Filippi
Minis In The Gong
[email protected]
www.minisinthegong.com.au

its always cheaper if you pull the lock out and take it to a locksmith workshop ,my shop would charge around 30-40 to rekey the barrell ,so use that as a guide ,in this it would also get a good service with new springs and tumblers (toyota) best to check if they specialise in auto though

_________________
with the fury of a Monkey Dishwasher aimed at your Purple

57 Morris minor
88 Rover Mini

worst case bring it to mini's down under and i will do it for you

_________________
with the fury of a Monkey Dishwasher aimed at your Purple

57 Morris minor
88 Rover Mini