| ausmini https://www.ausmini.com/forums/ |
|
| Little gutter rust, help please! https://www.ausmini.com/forums/viewtopic.php?f=2&t=22214 |
Page 1 of 1 |
| Author: | jbeenz [ Tue Sep 05, 2006 12:39 pm ] |
| Post subject: | Little gutter rust, help please! |
This is my front, l/h gutter.... 
advise on this little issue, its the only lil bit in the gutters, there are also a coupla spots on the a-pillar, ist not reall weld-in-a-patch size, but im not that happy about using filler on it. could it be braised up or lead loaded? or is it too big? any suggestions welcome... jed |
|
| Author: | Harley [ Tue Sep 05, 2006 12:41 pm ] |
| Post subject: | |
A good person with a mig should be able to take care of that without distorting much. 
|
|
| Author: | jbeenz [ Tue Sep 05, 2006 12:53 pm ] |
| Post subject: | |
have access to a mig and a good peron
ill let the mig practice on the rear of the car first i think 
|
|
| Author: | DRB33N [ Tue Sep 05, 2006 1:00 pm ] |
| Post subject: | |
I would be keen to learn how to weld and then practice on scrap metal, what places can offer this? |
|
| Author: | Harley [ Tue Sep 05, 2006 1:02 pm ] |
| Post subject: | |
Do a TAFE course.
|
|
| Author: | jbeenz [ Tue Sep 05, 2006 1:03 pm ] |
| Post subject: | |
usually community courses and the like over here if its just for fun. i brought an arc welder and practiced myself, it just takes time to learn on thin steel. mate has a mig, but has had some traning at uni, but really its all practice and knowing how to set the machine up right. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|