ausmini
https://www.ausmini.com/forums/

SU Carburettor on Ebay. (You must be kidding)
https://www.ausmini.com/forums/viewtopic.php?f=2&t=22389		 Page 1 of 1
Author:  Morris 1100 [ Sun Sep 10, 2006 7:26 pm ]
Post subject:  SU Carburettor on Ebay. (You must be kidding)
SU Carburettor - Used carby to suit Morris/Leyland/Moke
Quote:
Has been working recently on 1100cc moke.

That explains the insect nest in the vent hole. :roll:

Quote:
Ready to bolt on and start....

How is it going to start without a jet?
Why is the float bowl on that angle? Is it a downdraught carby? 8)

What a goose! How can anyone try to sell a an incomplete carby as "Ready to bolt on and start" I hope it is nobody on Ausmini that is selling it. :lol:
Author:  AJ [ Sun Sep 10, 2006 7:40 pm ]
Post subject: 
And cheap too....hahahaha :D
Author:  GT [ Sun Sep 10, 2006 7:50 pm ]
Post subject: 
Screw missing from fuel bowl top. Fuel line IN on impossible angle to connect a hose.

Quote:
Good for a twin system!


What the?
Author:  Morris 1100 [ Sun Sep 10, 2006 7:52 pm ]
Post subject: 
I forgot that to mention the screws are missing from the dashpot. :lol:

Should we ask some questions to the seller? :twisted:
Author:  1018cc [ Sun Sep 10, 2006 8:06 pm ]
Post subject: 
The little ID plate on the float bowl is gone (because there are no screws in it) so it would be impossible to tell what it is REALLY off of. People will try to sell anything on eBay.

You've gotto look at the positives, at least someone won't lose a lot of money IF it does sell. I wouldn't pay that for 'half' a carb though!
Author:  CPOCSM [ Sun Sep 10, 2006 9:18 pm ]
Post subject: 
Here is my question to him:

Is the carby complete or is this just an example of an SU. It is missing the jet so will not work in any vehicle. The screws are all missing off the dash pot and there are no linkages. The float doesnt work real well at that angle either. If this is just a piccie then great but I hope this isnt being sold as a working carby because it aint...Cheers

I think I had everything - feel free to add to it...

Hooroo
Author:  1018cc [ Sun Sep 10, 2006 9:23 pm ]
Post subject: 
Sounds like you've nailed it, keep us posted I would like to know what he comes back with! Were not all as stupid as he thinks people are!
Author:  Morris 1100 [ Sun Sep 10, 2006 9:24 pm ]
Post subject: 
Gee, that read a lot better than mine. :oops:
Quote:
Have you been a dickhead all your life or have you just started?
Author:  1018cc [ Sun Sep 10, 2006 9:26 pm ]
Post subject: 
LOL! I don't think you would have got a reply from that one!
Author:  willy [ Sun Sep 10, 2006 9:27 pm ]
Post subject: 
Did he really write that? :shock:
Author:  CPOCSM [ Sun Sep 10, 2006 9:40 pm ]
Post subject: 
Morris 1100 wrote:
Gee, that read a lot better than mine. :oops:
Quote:
Have you been a dickhead all your life or have you just started?


You are all class... :lol:

Hooroo
Author:  drmini in aust [ Sun Sep 10, 2006 9:44 pm ]
Post subject: 
Huhu- that bowl angle is not too bad, my bro's Imp runs my 1st 850's old HS2, running at 45* angle. :shock:
No problemo.. 8)
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/