hey guys just wondering how easy is it to remove subframe to remove the gearbox and replace?

thanks,
scott

You're better off pulling the whole engine and gearbox out the top and popping the block off it then. Removing the subframe to get the engine out is a lot more difficult.

_________________
-Wasabi
1972 Clubman - Daily Driver
1962 850 - EW1 Powered

once the engine is out its fairly easy, if you canfollow a hanes manual. just a few things to watch:
1. buy a flywheel puller
2. re-fitting the oil pickuo o-ring
3. refiting the primary gear seal
um, cant think of the rest... but read the manual and see how you feel about it first.

_________________
speed costs....how fast do you want to go...