Now have the drivers side fitted and all good..
| ausmini https://www.ausmini.com/forums/ |
|
| New Seat Fitted.. https://www.ausmini.com/forums/viewtopic.php?f=2&t=22606 |
Page 1 of 1 |
| Author: | Smokie [ Sat Sep 16, 2006 12:08 pm ] |
| Post subject: | New Seat Fitted.. |
Well, have the passenger seat out of a 1994 Charade fitted, now just have to wait for the drivers side to come from the upholsterer.. |
|
| Author: | Razor [ Sat Sep 16, 2006 12:59 pm ] |
| Post subject: | |
it looks like its supposed to be there I like it! |
|
| Author: | Marvin [ Sat Sep 16, 2006 9:42 pm ] |
| Post subject: | |
How is the rear mounted to/sitting on the floor? |
|
| Author: | Spaceboy [ Sat Sep 16, 2006 10:05 pm ] |
| Post subject: | |
looks like a good size, is it comfortable? |
|
| Author: | Smokie [ Sun Sep 17, 2006 9:21 am ] |
| Post subject: | |
Quote: How is the rear mounted to/sitting on the floor?
Front bracket fits to the original support.. These brackets are bolted to the floor with a 5mm plate underneath.. Spaceboy, the seats are 10mm wider that the original Mini seats and are quite comfy to sit in.. |
|
| Author: | Smokie [ Tue Sep 26, 2006 5:17 pm ] |
| Post subject: | |
Now have the drivers side fitted and all good..
|
|
| Author: | YoungMiniac [ Tue Sep 26, 2006 7:34 pm ] |
| Post subject: | |
Looks great... |
|
| Author: | slinkey inc [ Tue Sep 26, 2006 7:53 pm ] |
| Post subject: | |
Because of the wider seats do you have to put your seatbelts on before shutting the door?  Dad's clubby it's a must..dam those wide swift setas, main difference is urs suit your car, dad's don't.
|
|
| Author: | Smokie [ Tue Sep 26, 2006 8:00 pm ] |
| Post subject: | |
No problems getting the seat belt on once sitting in the car and door is closed. I made sure that the seats were as close to the middle of the Mini as possible.... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|