It has been written quite a lot, but that don't make it right!
Minis were invented before millimeters.
| ausmini https://www.ausmini.com/forums/ |
|
| will these wheels fit a mini https://www.ausmini.com/forums/viewtopic.php?f=2&t=22762 |
Page 1 of 1 |
| Author: | buztoy [ Wed Sep 20, 2006 5:44 pm ] |
| Post subject: | will these wheels fit a mini |
hey sooner or later im gonna get 13's so i was thinking something maybe different, the wheels are 13 by 6 drag ways with a bolt patter 100mm, so i dont see whats stopping me, i was also looking at those spider mags they stick on lancers, |
|
| Author: | buztoy [ Wed Sep 20, 2006 5:51 pm ] |
| Post subject: | |
sorry forgot to post the link http://cgi.ebay.com.au/ESCORT-CORTINA-D ... dZViewItem |
|
| Author: | Morris 1100 [ Wed Sep 20, 2006 6:46 pm ] |
| Post subject: | |
Umm, the Mini is not 100mm pcd, it is 4inch. If you force them you will break the studs. |
|
| Author: | buztoy [ Wed Sep 20, 2006 7:03 pm ] |
| Post subject: | |
are you sure, i could swear i saw somewhere written down it was 100mm, but still i will have em redrilled, |
|
| Author: | Morris 1100 [ Wed Sep 20, 2006 7:20 pm ] |
| Post subject: | |
It has been written quite a lot, but that don't make it right!
Minis were invented before millimeters.
|
|
| Author: | cush [ Wed Sep 20, 2006 7:26 pm ] |
| Post subject: | |
it's 104.somethingorother mm
|
|
| Author: | buztoy [ Wed Sep 20, 2006 7:31 pm ] |
| Post subject: | |
if i have them redrilled will i have any spacing problems |
|
| Author: | JC [ Wed Sep 20, 2006 8:50 pm ] |
| Post subject: | |
4 inches. A measurement I'm sure you're familiar with young Cush. 25.4mm x 4 = 101.6mm |
|
| Author: | badassmini [ Wed Sep 20, 2006 9:06 pm ] |
| Post subject: | |
buztoy i have just bought some cortina/escort mags for my mini and the stud pattern is different they almost fit though. these are them before they got redrilled will take pictures of them with new holes tomorrow. 
if you do end up buying those mags you'll have to get the stud holes welded up and redrilled when i got mine done i just got them redrilled in between the old stud holes cause no one would weld up the old holes and redrill them[/img] |
|
| Author: | badassmini [ Sat Sep 23, 2006 4:10 pm ] |
| Post subject: | |
here you go better late then never my mags redrilled 
 ]
im going to get some caps made up to fit into the bigger holes to cover them up so you can't see them |
|
| Author: | buztoy [ Sat Sep 23, 2006 5:20 pm ] |
| Post subject: | |
 sorry mate but which holes are you running, if so which ones were ment to be welded up, i dont get it, the big ones look like they are the are set up for luggs, but the others are set up for stock nuts, do you need to change the studs of am i just ass about my face,
|
|
| Author: | badassmini [ Sun Sep 24, 2006 3:58 pm ] |
| Post subject: | |
sorry mate should of explained myself better the holes i'm using are the little holes and the big holes were meant to get welded up but i couldn't get anyone to do that. so im just going to get t caps made up to plug up the bigger holes. yes you will need longer studs hope this helps if any other questions just ask cheers |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|