ausmini
https://www.ausmini.com/forums/

A bit squashed...
https://www.ausmini.com/forums/viewtopic.php?f=2&t=23591
Page 1 of 1

Author:  Smokie [ Thu Oct 12, 2006 5:37 pm ]
Post subject:  A bit squashed...

Changed the rear donuts today because I thought the old ones might be a bit squashed... The LS now sits about 4" higher...

Image

Author:  meeni [ Thu Oct 12, 2006 5:42 pm ]
Post subject: 

does it look really tall, even with hi los i found that new cones are really tall.. i dont like them, id rather more regularly fit the slightly worn in ones.. but yer, got any pics of the ride height?

Author:  sports850 [ Thu Oct 12, 2006 5:52 pm ]
Post subject: 

Nah , plenty of life left in the one on the left , dunno what you're wingeing about ....


Don't see many that are that squashed , wonder if it was a fault as well as old ?

Author:  Smokie [ Thu Oct 12, 2006 6:23 pm ]
Post subject: 

Quote:
Don't see many that are that squashed , wonder if it was a fault as well as old ?

Hmmm, some nasty people ask that about me as well sports850..

Will take a pic tomorrow of the ride height meeni, it does sit up quite high but it sure made a difference to the ride...

Author:  drmini in aust [ Thu Oct 12, 2006 7:20 pm ]
Post subject: 

That far left one has done a lot of time in the front of a Mini, I reckon.
They don't get that flat ever, just in the rear... :lol:

Author:  meeni [ Thu Oct 12, 2006 7:23 pm ]
Post subject: 

meenis fronts are similar to the middle ones... rears are still quite good..

Author:  Smokie [ Thu Oct 12, 2006 7:59 pm ]
Post subject: 

Quite a good possibility of that Doc. I would say that the fronts might have been put in new awhile ago as the front was sitting higher than the rear and then the old fronts put in the back for some unknown reason???

Author:  gafmo [ Thu Oct 12, 2006 8:02 pm ]
Post subject: 

Looks like some one had fat chicks in thier Mini :shock:

Author:  Mini Mad [ Thu Oct 12, 2006 8:57 pm ]
Post subject: 

Yea...i have never seen cones that flat! :shock:

The new ones are great, heaps better handling too 8)

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/