yeah replace arms with blades in my post
.
Shard
| ausmini https://www.ausmini.com/forums/ |
|
| Wiper Blades https://www.ausmini.com/forums/viewtopic.php?f=2&t=23645 |
Page 1 of 1 |
| Author: | Hanra [ Fri Oct 13, 2006 8:45 pm ] |
| Post subject: | Wiper Blades |
Ive got 2 different length blades on my car, the arm is the same length and shape but 1 blade is 26cm and the other is 29cm.... The longer blade fouls at the top of the windscreen on the rubber if the wipers are used. Even though i will never ever use my wipers, it would be good to actually have them be able to work if need be... I had them powder coated silver to.. Then put em on n realised it would foul, mind u this was 3 1/2 yrs ago...!! My wipers r single speed and park on the drivers side. How long r urs? Any 1 wanna give away/sell a 26cm blade or arm/blade assy? |
|
| Author: | catzzmandu [ Sat Oct 14, 2006 1:09 am ] |
| Post subject: | |
hmmm... does anyone else have the problem of the wipers wipe off the window and onto the car a bit when it rains? (sorry stealing your thread a bit hehe) |
|
| Author: | Hanra [ Sat Oct 14, 2006 7:21 am ] |
| Post subject: | |
Its only just slightly off the glass and onto the rubber, once its onto the rubber it fouls and stays there. If i can get a hold of another 26cm wiper blade, it will be spot on!!! Dunno where this long blade came from, ive actually got another 1 here spare, i thought it may of been off my parts car, a 74 clubman, it had 2 speed wipers n parked on the passenger side...? |
|
| Author: | Shard [ Sat Oct 14, 2006 10:47 am ] |
| Post subject: | |
I had this problem, turns out one of my wiper arms was a 12" (inches or cm can't remember now, off a clubby?) and the other 10". I had to grab a second hand 10" arm to replace the 12" and now it's all good. Shard |
|
| Author: | Hanra [ Sat Oct 14, 2006 1:47 pm ] |
| Post subject: | |
Its not so much the arm thats wrong but the blade section.... |
|
| Author: | Shard [ Sat Oct 14, 2006 9:40 pm ] |
| Post subject: | |
yeah replace arms with blades in my post .
Shard |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|