ausmini https://www.ausmini.com/forums/ |
|
Hows this for Bling?? https://www.ausmini.com/forums/viewtopic.php?f=2&t=23824 |
Page 1 of 2 |
Author: | pristic [ Wed Oct 18, 2006 7:40 pm ] |
Post subject: | Hows this for Bling?? |
Bling Bling Baby... ![]() ![]() Peter |
Author: | drmini in aust [ Wed Oct 18, 2006 7:53 pm ] |
Post subject: | |
Not original, should have factory rust, it's a Leyland... ![]() |
Author: | pristic [ Wed Oct 18, 2006 8:07 pm ] |
Post subject: | |
Haha, Yeah, I thought about leaving a bit of rust in there... but umm, no. Peter |
Author: | Spaceboy [ Wed Oct 18, 2006 8:12 pm ] |
Post subject: | |
did you paint it or polish it? |
Author: | pristic [ Wed Oct 18, 2006 8:16 pm ] |
Post subject: | |
The wiper is painted and the cylinders are polished. The wiper wouldnt polish up nice! I tried, but looked crap... so on went some sexy paint. Peter. |
Author: | Spaceboy [ Wed Oct 18, 2006 8:23 pm ] |
Post subject: | |
yeah it woulda taken a bench grinder with a polishing wheel i reckon ![]() |
Author: | pristic [ Wed Oct 18, 2006 8:24 pm ] |
Post subject: | |
Spaceboy wrote: yeah it woulda taken a bench grinder with a polishing wheel i reckon
![]() Ummm, thats what I used Champ ![]() Peter. |
Author: | Spaceboy [ Wed Oct 18, 2006 8:28 pm ] |
Post subject: | |
i tried it with sandpaper, metal polish and el-beau grease, got the flat part nice, but the round part was hard. then i gave up ![]() |
Author: | Lillee [ Wed Oct 18, 2006 8:58 pm ] |
Post subject: | |
Yeah they look ok, but do they work? ![]() |
Author: | LS1380 [ Wed Oct 18, 2006 9:10 pm ] |
Post subject: | |
Lillee wrote: Yeah they look ok, but do they work?
![]() Of course they will work..There off a Clubbie ![]() |
Author: | YoungMiniac [ Wed Oct 18, 2006 9:12 pm ] |
Post subject: | |
Don't use a hand buffer, had a bad accident today at work, currently one armed, stirken to right arm duties and have dressing got to do back on friday, mondya and thursday to get re-dressed, If it was any deeper I would need plastic surgery(skin-o-graph)..... And it hurts heaps a burn/graze.... I guess u learn the hard way.... ![]() |
Author: | YoungMiniac [ Wed Oct 18, 2006 9:13 pm ] |
Post subject: | |
O yeah and it looks good.... |
Author: | Mick [ Wed Oct 18, 2006 9:14 pm ] |
Post subject: | |
I spent most of my time as an apprentice dabbing at various injuries too. In time, young padawan, in time...... |
Author: | speedy [ Wed Oct 18, 2006 9:15 pm ] |
Post subject: | |
LS1380 wrote: Of course they will work..There off a Clubbie ![]() YoungMiniac wrote: Don't use a hand buffer, had a bad accident today at work, currently one armed, stirken to right arm duties and have dressing got to do back on friday, mondya and thursday to get re-dressed, If it was any deeper I would need plastic surgery(skin-o-graph).....
And it hurts heaps a burn/graze.... I guess u learn the hard way.... ![]() That's two people from WA typing one handed! ![]() ![]() ![]() Looking schmick Pristic, you got any before photos? |
Author: | pristic [ Wed Oct 18, 2006 9:52 pm ] |
Post subject: | |
Narp, no before photos ![]() Got carried away... and looked forward to the 'after' ![]() IAN!!! What the heck did you do? Peter. |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |