| ausmini https://www.ausmini.com/forums/ |
|
| engine mounts https://www.ausmini.com/forums/viewtopic.php?f=2&t=23946 |
Page 1 of 1 |
| Author: | xplosion77 [ Sun Oct 22, 2006 9:51 pm ] |
| Post subject: | engine mounts |
hey i have a 998 in my clubby and im thinking of putting a 1275 in it are the engine mounts the same for a 998 and 1275 or do they just bolt on in the same place as the 998 thanks guys |
|
| Author: | drmini in aust [ Sun Oct 22, 2006 10:07 pm ] |
| Post subject: | |
Engine mounts are the same for Mini 998 and 1275. 
However if the 1275 is out of a Morris 1100S, the engine's front plate has 2 mounts on it that are in the way for a Mini. So, get an angle grinder and cut them off. Or use a Mini front plate. Then use the Mini mount setup. |
|
| Author: | xplosion77 [ Mon Oct 23, 2006 7:29 am ] |
| Post subject: | |
cool thanks for that |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|