$150 for a complete set for both front quarters is about right for Aussie quarter vent seals. If you can find them cheaper please let me know mine a buggered
| ausmini https://www.ausmini.com/forums/ |
|
| There is never a rubber around when you need one! https://www.ausmini.com/forums/viewtopic.php?f=2&t=23958 |
Page 1 of 1 |
| Author: | rainbowpython03 [ Mon Oct 23, 2006 1:41 pm ] |
| Post subject: | There is never a rubber around when you need one! |
Hi folks, I just won a new quarter window on Ebay for the Mini SS, it was the least I could do after making her stand around with her top off for two days at Minis Down Under 2006. So I thought bite the bullet and replace the rubber on both quarters! I was just quoted $145.00 +Gst for the full quarter window kit, is this reasonable as im having trouble seeing the Gold thread in the old ones....lmao. I would appreciate hearing from anyone who has got them at a better price as $300.00 for two Quarter window rubbers is a tad out of my league (im not a polititian). Thanks, Jim. |
|
| Author: | Mick [ Mon Oct 23, 2006 1:48 pm ] |
| Post subject: | |
Oh they are hideously expensive because they are pretty well custom made low production jobs for the Australian Minis these days. I think I paid a much less (maybe half??) at Minispares Padstow a year or two back, but just bite the bullet if you need to, it's not worth teh rust at the bottom of the doors. The price is a crime, but what are you going to do?? There's a good how to on the justanothermini website. Or Just ask GT. |
|
| Author: | rainbowpython03 [ Mon Oct 23, 2006 2:10 pm ] |
| Post subject: | |
Thanks for the quick reply, I have heard of someone in Springwood, NSW that is supposed to have a lot of rubber available, but my eaves dropping skills arenot as good as they were once.....lol. I am pretty sure Padstow was out last time I rang them. I agree with cost vs headache I just dont like being ripped off. Thanks, Jim. |
|
| Author: | Mick [ Mon Oct 23, 2006 2:14 pm ] |
| Post subject: | |
Ask Minispare Padstow what they would normally charge anyway, it all sounds a little too pricey. maybe they stuffed up they're pricing and are charging you too much. |
|
| Author: | Anto [ Mon Oct 23, 2006 2:19 pm ] |
| Post subject: | |
$150 for a complete set for both front quarters is about right for Aussie quarter vent seals. If you can find them cheaper please let me know mine a buggered
|
|
| Author: | rainbowpython03 [ Mon Oct 23, 2006 5:03 pm ] |
| Post subject: | |
Hi folks, I have been told by a reliable source that the original manufactures of the rubbers for the Clubby also did the rubbers for the Holden Gemini. Can anyone confirm this to be true? If so they may be a cheaper option. Thanks, Jim. |
|
| Author: | Anto [ Mon Oct 23, 2006 8:14 pm ] |
| Post subject: | |
rainbowpython03 wrote: Hi folks,
I have been told by a reliable source that the original manufactures of the rubbers for the Clubby also did the rubbers for the Holden Gemini. Can anyone confirm this to be true? If so they may be a cheaper option. Thanks, Jim. If that's the case, then you'll probably find the rubbers will shrink like on all good Geminis! Maybe try Spectrum rubber?
|
|
| Author: | WEEVAN [ Mon Oct 23, 2006 10:26 pm ] |
| Post subject: | |
Try emailing Robert at [email protected] His son works with me. I'm pretty sure he can supply at a reasonable price. |
|
| Author: | rainbowpython03 [ Mon Oct 23, 2006 11:22 pm ] |
| Post subject: | |
Thanks Guys, I have to do better than $300 for 2 tiny windows that I never open (the ss is a chop top...lol). |
|
| Author: | rainbowpython03 [ Tue Oct 24, 2006 5:36 am ] |
| Post subject: | |
Hi, Just wanted to let you know that I got a return on the Btrubber email address as no longer valid. Thanks anyway, Jim. |
|
| Author: | WEEVAN [ Tue Oct 24, 2006 8:03 am ] |
| Post subject: | |
OOPS! Try [email protected] |
|
| Author: | Rodney [ Tue Oct 24, 2006 8:56 am ] |
| Post subject: | |
Should be somewhere in the $150 range for both sides. I was after some last year and the quoted price ranged from $140 to $176. The price I got last year at $140 was from Mini Bits, in Officer, Victoria and the phone number is 03 9707 1666......ask for John. He does mail orders. Cheers |
|
| Author: | Mick [ Tue Oct 24, 2006 9:10 am ] |
| Post subject: | |
Yeah I reckon they've stuffed up, try those guys again for a new price. |
|
| Author: | rainbowpython03 [ Tue Oct 24, 2006 9:53 am ] |
| Post subject: | |
Thanks for the tip Weevan, Robert just got back to me. The Optus email address was the one! I will post the price when I get mine and check them out. Thanks heaps again to all who helped  Jim
|
|
| Author: | rainbowpython03 [ Tue Oct 24, 2006 2:49 pm ] |
| Post subject: | |
Hi folks, I have just placed an order with BTRubber in Victoria for my left and right Quarter window rubber set, their list price was $81.45!!!! So it just goes to show it pays to ask around and a big thanks to WEEVAN for the contact details. Jim.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|