ausmini
https://www.ausmini.com/forums/

EOI Van/Traveller body shells to suit Tamiya Mini's
https://www.ausmini.com/forums/viewtopic.php?f=2&t=24316		 Page 1 of 4
Author:  poeee [ Wed Nov 01, 2006 12:49 pm ]
Post subject:  EOI Van/Traveller body shells to suit Tamiya Mini's
We have the oportunity to get some Mini Van/Traveller body shells made up to suit Tamiya R/C Mini's. Cost will be $40ea if we get more than 20 pre orders.

These shells will be made up from an existing RARE shell that was brought into Aus from Germany. We don't know the origin of the shell, but no others have been found!

Will fit the Tamiya M03 chassis, which is the "classic Mini". Will also fit the M03L, which is the BMW Mini, but you will have to take out the chassis stretch piece.

Here is a pic of the original (obviously comes unpainted).

Image
Author:  Harley [ Wed Nov 01, 2006 1:53 pm ]
Post subject: 
Put me down for one! 8)
Author:  Wombat [ Wed Nov 01, 2006 2:11 pm ]
Post subject: 
Hey you have got me thinking- My son's partner gave me a RC BINI If I could change the body over....................

What are the wheel base diamensions of there bodies?
Author:  Harley [ Wed Nov 01, 2006 2:29 pm ]
Post subject: 
A tamiya 1/10 mini has a 210mm wheelbase. Any M-03 variant (tamiya BINI, swift, M3, S2000) will fit with a quick change to the chassis length, as Poeee said, remove the spacer. :D
Author:  GAT51 [ Wed Nov 01, 2006 3:59 pm ]
Post subject: 
I'm in, love to get the shell and a kit if possible.
Author:  Anto [ Wed Nov 01, 2006 4:34 pm ]
Post subject: 
I might be interested, the box my RC Mini came in says M03, so I assume it fits :) How hard would it be to post?
Author:  13secmini [ Wed Nov 01, 2006 5:27 pm ]
Post subject: 
ill grab one :D
Author:  monda [ Wed Nov 01, 2006 5:59 pm ]
Post subject: 
me too!
Author:  gafmo [ Wed Nov 01, 2006 6:40 pm ]
Post subject: 
Dont have a Car..But
Author:  poeee [ Wed Nov 01, 2006 7:07 pm ]
Post subject: 
Shouldn't be too hard to post off.

Looks like we are getting some interest here and i'm sure we'll get interest from RC clubs as there is an M03/L only class. So hopefully this will go ahead!
Author:  Wombat [ Wed Nov 01, 2006 7:21 pm ]
Post subject: 
OK My BINI has 210 wheel base that is 105 wide It is a Dickie brand
If that will fit I'll take one. What is the "spacer" the only thing I can see that looks removeable is about 1/2" under the front bumper
Author:  waznotme [ Wed Nov 01, 2006 9:21 pm ]
Post subject: 
I'm intersted :)
Author:  LS1380 [ Wed Nov 01, 2006 9:22 pm ]
Post subject: 
Yes please Scott.
Can you put us (son) down for one.We can then swap it over with this when we want something different 8)
http://i34.photobucket.com/albums/d131/ ... ger003.jpg
Author:  Harley [ Thu Nov 02, 2006 7:48 am ]
Post subject: 
Wombat wrote:
OK My BINI has 210 wheel base that is 105 wide It is a Dickie brand
If that will fit I'll take one. What is the "spacer" the only thing I can see that looks removeable is about 1/2" under the front bumper


Doesn't apply to you, the spacer can be found in some Tamiya brand cars.
:D
Author:  cush [ Thu Nov 02, 2006 7:56 am ]
Post subject: 
someone needs to make some fastbacks, buckles or monacos.. :)
Page 1 of 4 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/