Weirdeh wrote:
Anyone Heading to Canada or the US in the near future? hoping someone can transport some parts for me. I am in Canada and the parts are in AU
Just a few days too late ...I know three guys over there right now
| ausmini https://www.ausmini.com/forums/ |
|
| Travel to the US or Canada ? https://www.ausmini.com/forums/viewtopic.php?f=2&t=24345 |
Page 1 of 1 |
| Author: | Weirdeh [ Thu Nov 02, 2006 3:26 am ] |
| Post subject: | Travel to the US or Canada ? |
Anyone Heading to Canada or the US in the near future? hoping someone can transport some parts for me. I am in Canada and the parts are in AU |
|
| Author: | TurboOrangie [ Thu Nov 02, 2006 8:43 am ] |
| Post subject: | |
I can't help you out with that. But I'm also in Canada (Victoria), and I was wondering where are you located? |
|
| Author: | Weirdeh [ Thu Nov 02, 2006 1:12 pm ] |
| Post subject: | |
I am in New Brunswick, the other coast. I like the flip on yours, mine flips forward. I will have a 1275 in by spring. (fingers crossed) |
|
| Author: | 9YaTaH [ Thu Nov 02, 2006 4:22 pm ] |
| Post subject: | Re: Travel to the US or Canada ? |
Weirdeh wrote: Anyone Heading to Canada or the US in the near future? hoping someone can transport some parts for me. I am in Canada and the parts are in AU
Just a few days too late ...I know three guys over there right now
|
|
| Author: | TurboOrangie [ Thu Nov 02, 2006 5:43 pm ] |
| Post subject: | |
Quote: Just a few days too late ...I know three guys over there right now Rolling Eyes
I didn't want to rub it in, but since 9YaTaH did, I will too. There are a couple fellow Ausmini'ers who are coming to see me here in Victoria in a couple days. But they left a week or so ago so it's too late to send anything with them. I look forward to meeting fellow Ausmini'ers, I don't think the chance will happen too often for us Canadians. |
|
| Author: | Weirdeh [ Fri Nov 03, 2006 12:11 am ] |
| Post subject: | |
So I have a good idea just a couple of weeks late Eh? I was thinking it would be a good time of year for people to be going to see friends and so on. the items I need BTW is a set of vent windows complete with the window track. so not heavy but may not fit in the overhead bin. I have seen people travel with Ski's and they just check them when boarding. And yes I know the Canadian doors are different but I know a guy that can customize the vents or my doors. we just need the assembly to start from. Really hope someone will be able to Help |
|
| Author: | Sydney_Leyland [ Fri Nov 03, 2006 6:25 am ] |
| Post subject: | |
i will be travelling to canada in the near future once i have funds sorted.. not to sure if im keen carting 2 doors around.. wat kinda weight we talking? im heading to ontario, barrie andrew |
|
| Author: | Weirdeh [ Fri Nov 03, 2006 7:18 am ] |
| Post subject: | |
Hey Andrew Its really only the vent window and the guide for the roll up part of the main window. if that makes sense at all. so the height of the door including the window and the width of the vent pane. and I would think not very heavy. And Barrie would be great - I could have you drop it with friends. Adam |
|
| Author: | Weirdeh [ Sat Nov 25, 2006 11:37 am ] |
| Post subject: | |
Christmas is coming up anyone have reletives or friends coming over? (if they are leaving canada they have to come back) the front 1/4 vent windows will travel just like ski's. |
|
| Author: | Mike_Byron [ Sat Nov 25, 2006 3:03 pm ] |
| Post subject: | |
Why not just have them posted over as two parcels via air mail. It would be in the region of $40 per parcel. I am about to post a rustic shearing handpiece to a collector in minasota (however that is properly spelt) The hand piece is not that much shorter and weighs 1.55 kg. It fits into the 1.5 - 2.0 kg category and $AUS39.75 via air or $AUS 27.00 via surface. |
|
| Author: | Darren [ Sat Nov 25, 2006 10:03 pm ] |
| Post subject: | |
I don't want to intrude on the topic, but I'm just wondering if anybody has ever shipped parts off to the UK, and any couriers that can be recommended from the land down under? Even better, would anybody know anything about bulk shipping parts, such as a crate full via sea (or however it works)? 
|
|
| Author: | Mike_Byron [ Sat Nov 25, 2006 10:57 pm ] |
| Post subject: | |
Darren Yes - I have - I lived in worked in Comber, Co. Down for a while and have sent all nature of things back. The dynamics of couriers have changed since them but bsically postage works well but to a point. In short, tell us what it is you need and we can advise better |
|
| Author: | Weirdeh [ Sat Nov 25, 2006 11:37 pm ] |
| Post subject: | |
I bought the 1/4 vent windows from Ben (siclad) in March 2006 and we have tried the "surface" mail twice and neither have ever gotten here. I don't think either Ben or I want to pay for shipping again. and I would feel better knowing that someone from the mini community was bringing them over. If they are checked as baggage there is no charge. and once they are in this counrty (canada) I can get them to me much easier. |
|
| Author: | Roundie [ Sun Nov 26, 2006 3:16 pm ] |
| Post subject: | |
My Brother in law is going to vagas in a couple of weeks i will ask him if you want see if he minds |
|
| Author: | Weirdeh [ Mon Nov 27, 2006 2:53 am ] |
| Post subject: | |
Hey roundie that would be great! Let me know maybe PM with the details. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|