ausmini
https://www.ausmini.com/forums/

After Market Temperature Guages
https://www.ausmini.com/forums/viewtopic.php?f=2&t=24411		 Page 1 of 1
Author:  rainbowpython03 [ Fri Nov 03, 2006 1:11 pm ]
Post subject:  After Market Temperature Guages
Sorry if this has been covered before but I bought and installled a VDO Temp guage. The sender is the correct type for the original guage. The VDO Guage reads off scale (above 120 degrees) when the engine is hot so is useless for telling me if I am over heating.

Do i need to match the sender to the Guage ( I know dumb question) as I think I have nailed the overheating problem, just buggered if I can prove it....lol

Thanks Guys,

Jim. :D
Author:  WiLo [ Fri Nov 03, 2006 2:01 pm ]
Post subject: 
yes you need a sender which is calibrated to your guage
Author:  doogie [ Fri Nov 03, 2006 2:54 pm ]
Post subject: 
Ring Barry Walker, St George instruments

91 Planthurst rd Carlton, 9547 0855

Tell him your issue & he'll set it right.

Doogie
Author:  rainbowpython03 [ Fri Nov 03, 2006 7:15 pm ]
Post subject: 
Thanks Guys,
Got the VDO sender today and its the wrong thread. Ill give barry a ring.

Ta,

Jim :D
Author:  rainbowpython03 [ Mon Nov 06, 2006 6:39 pm ]
Post subject: 
Finally got th eright sender today through my local Autopro store. Read about 75 at hot idle.
So hopefully all is well in cooling systemville.

Jim.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/