| ausmini https://www.ausmini.com/forums/ |
|
| In hose washer pumps https://www.ausmini.com/forums/viewtopic.php?f=2&t=24602 |
Page 1 of 1 |
| Author: | doogie [ Tue Nov 07, 2006 6:17 pm ] |
| Post subject: | In hose washer pumps |
Does anybody know if a inline washer pump motor is available, basically i want to run the original washer bottle in my van, so basically i want a pump to go in the hose between the washer bottle & jets. Does such a beast exist? Doogie |
|
| Author: | Morris 1100 [ Tue Nov 07, 2006 6:27 pm ] |
| Post subject: | |
Yes, they do exist. I got one a while ago for my Morris 1100. I got it from a spare parts place somewhere. I stuck it behind the dash to keep it looking stock. It didn't work! They need to be mounted lower than the bottle to keep the pump primed. I had a non return valve in the line but it still managed to flow back and you needed to prime the pump to get it flowing again. I went back to the stock plunger pump. I will get around to trying it again one day. Some jap cars have a pump in the bottom of the washer bottle that just push into a grommet, you can pull them out and fit a hose on the inlet side. |
|
| Author: | awdmoke [ Tue Nov 07, 2006 6:27 pm ] |
| Post subject: | |
Yes, AutoPro and the like have generic pumps. Expect to pay about $20 though! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|