ausmini
https://www.ausmini.com/forums/

1100 8.4 inch disc brakes
https://www.ausmini.com/forums/viewtopic.php?f=2&t=24977
Page 1 of 1

Author:  nathanm [ Thu Nov 16, 2006 8:46 pm ]
Post subject:  1100 8.4 inch disc brakes

are these brakes the same as a minis ones
http://cgi.ebay.com.au/Morris-1100-mini_W0QQitemZ170049334771QQihZ007QQcategoryZ73583QQrdZ1QQcmdZViewItem

Author:  Harley [ Thu Nov 16, 2006 8:49 pm ]
Post subject: 

Unfortunately the answer is no.
It's possible the calipers may fit, but everything else is different.
:D

Author:  supercharged 850 [ Sat Nov 18, 2006 12:09 am ]
Post subject: 

^^ thats right.

And from what I can tell, the calipers are useless too. (I've got a set here)

Author:  Morris 1100 [ Sat Nov 18, 2006 10:09 pm ]
Post subject: 

The Morris 1100 does not have 8.4" brakes, they have 8" brakes so the ad is wrong. :roll:
supercharged 850 wrote:
And from what I can tell, the calipers are useless too. (I've got a set here)
The Morris 1100 calipers are two piston calipers just like the Cooper S only bigger. So if they are useless the Cooper S calipers must also be useless (but on a slightly smaller scale) Unless you are thinking of the Morris 1300/1500 single piston swinging calipers which look useless but do in fact work. 8)

Author:  Mick [ Sun Nov 19, 2006 12:09 am ]
Post subject: 

Morris 1100 wrote:
The Morris 1100 calipers are two piston calipers just like the Cooper S only bigger. So if they are useless the Cooper S calipers must also be useless (but on a slightly smaller scale) Unless you are thinking of the Morris 1300/1500 single piston swinging calipers which look useless but do in fact work. 8)


I think he meant they are useless for disc conversion on a mini (am I reading it right?)

Author:  supercharged 850 [ Sun Nov 19, 2006 12:15 am ]
Post subject: 

Useless for transplanting to minis. Yes, thats what I meant because thats what others were talking about.

Author:  Morris 1100 [ Sun Nov 19, 2006 12:18 am ]
Post subject: 

They seem to work OK on the 1275LS. 8)

Author:  supercharged 850 [ Sun Nov 19, 2006 12:57 am ]
Post subject: 

Well bugger me..... they didnt seem to want to fit my mini disc uprights....

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/