| ausmini https://www.ausmini.com/forums/ |
|
| wheel bearing fitment???? https://www.ausmini.com/forums/viewtopic.php?f=2&t=25052 |
Page 1 of 1 |
| Author: | cool69 [ Sun Nov 19, 2006 7:25 am ] |
| Post subject: | wheel bearing fitment???? |
Hi all, i am replacing the front wheel bearings but am unsure if both the bearings are the same? they look the same and have the same p/n, and which dust seal goes where, one has a lip on it and the other doesn't 
am i right in thinking both bearings are the same and the seal with the lip goes against the cv joint at the back!! Cheers Robbo[/url] |
|
| Author: | My_Mini_Rocks [ Sun Nov 19, 2006 8:15 am ] |
| Post subject: | W/bearing |
GHK1018... Yeah both bearings are the same, Make sure the spaced sections go face to face on the inside of the hub (obviously) Seal with lip goes on the back of the hub. (one closest to the CV) |
|
| Author: | cool69 [ Sun Nov 19, 2006 8:39 am ] |
| Post subject: | |
thanks mate |
|
| Author: | GT [ Wed Jul 25, 2007 1:08 pm ] |
| Post subject: | Re: W/bearing |
My_Mini_Rocks wrote: Seal with lip goes on the back of the hub. (one closest to the CV)
Thank you Andrew 
I had mine in backwards and the wrong way around  I knew something was up.... and SEARCH found me the answer  All sorted now.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|