ausmini
https://www.ausmini.com/forums/

Z cars
https://www.ausmini.com/forums/viewtopic.php?f=2&t=25116		 Page 1 of 1
Author:  Hanra [ Mon Nov 20, 2006 8:12 pm ]
Post subject:  Z cars
Have a look around this site.... http://www.zcars.org.uk/mini/index.htm Crazy Crazy!
Author:  Spaceboy [ Mon Nov 20, 2006 8:19 pm ]
Post subject: 
yeah we know already :lol: :lol: :lol:
Author:  HPDesign [ Mon Nov 20, 2006 8:26 pm ]
Post subject: 
bought the t-shirt, then I had to sell it. Cause it sent me broke, it demanded to be serviced every 5 minuites with synthetic oil and went through optimax like the a big thirsty V8
Author:  Angusdog [ Tue Nov 21, 2006 6:11 am ]
Post subject: 
From the site:
Quote:
Tools Required
Metric Spanners from 8 - 22mm
Metric Socket Set from 8 - 22mm
Hammer
Tape Measure
Marker Pen
4" Angle Grinder
9" Angle Grinder
Screwdrivers: Philips and Flatblade
Electric Drill plus 4.5, 6, 8 and 10mm drill bits Suitable for drilling metal
Safety Goggles
Ear Protectors and gloves
Trolley Jack
Axle Stands


Well, sounds quite easy. Oh, no; hold on, my drill bits are only rated for drilling cheese. That's me out then...
Author:  sports850 [ Tue Nov 21, 2006 7:01 am ]
Post subject: 
And before you get excited , motorbike engined car's aren't legal in Australia unless you pay $7,000 or so to get the engine tested for car emissions rather than bike emissions , they have different rules unfortunately :cry: :evil: :cry: :evil: :cry: :evil: :cry: :evil: :cry: :evil:
Author:  collins [ Wed Nov 22, 2006 8:43 am ]
Post subject: 
Remove one of the wheels and it is perfectly legal. ADR's ... the bane of my life. Was contemplating a Busa Clubman, then the ADR's wouldn't alow it. :x
Author:  sports850 [ Wed Nov 22, 2006 9:07 am ]
Post subject: 
I'm having horrid visions of a 500 hp Reliant 3 wheeler (the thing that mr Bean picks on ...) instead of a hyabusa mini here ... How about a massive chain driven drag wheel filling the rear of the mini driven by the hyabusa and the normal front subframe , would that work as being a 3 wheeler for the ADR's ?



Disclaimer , I know this is highly improbable , unsafe and unstable for anything other than straight line but imagine the acceleration ......
Author:  sports850 [ Wed Nov 22, 2006 9:58 am ]
Post subject: 
Hee hee , I was bored so did a dodgy drawing of what I meant above .... Have to put motor in the passenger seat area but still , if you wanted to do a cheap and nasty drag mini it could be fun .... Lethal...... but fun .
Image
Author:  paul_ewins [ Wed Nov 22, 2006 12:17 pm ]
Post subject: 
SSP racers live!
(probably meaningless to anyone under 40, but they were one of the coolest toys of the early 70s)
Author:  Blokeinamoke [ Wed Nov 22, 2006 12:24 pm ]
Post subject: 
paul_ewins wrote:
SSP racers live!
(probably meaningless to anyone under 40, but they were one of the coolest toys of the early 70s)


Its needs the pull out thing in the top. :lol:
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/