Are there any early clubman floor panel reproductions out there? I have the newer replacement floor panels, but the fit isn't all that great. I can make them work, but would be interested if someone had the floor panels that have the hydrolastic chanels and remote bulge in drivers side.

Try A Grade Panels in Melbourne.
None of the UK made ones have these channels.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Yeah, I might just cut a slot where they fit in and get a few bits of Zintex bent to size and tig em in, might be easier. Going to give it a bash on the weekend after welding in Ed's rear end.

I cut the l/h floor out of a clubbie at pick and pay with a battery drill and cold chisel. Left enough to trim and fit , then had it welded in .

_________________
68 Deluxe. All the Options and Mods. Bling-Bling.

Elmo, either you drilled ALLOT of holes or you went nuts with a cold chisel, surely the panel would have been deformed with all the beatng?