ausmini
https://www.ausmini.com/forums/

Power Windows?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=25138
Page 1 of 3

Author:  _666_ [ Tue Nov 21, 2006 1:07 pm ]
Post subject:  Power Windows?

i know this topic has been touched upona few times.. but there wasnt really a propper answer.. has it been done by anyone.. does anyone have it done .. or cant it be done ? ... i beleive rover mini's have a kit available for them... but i dont know much about it

Author:  cush [ Tue Nov 21, 2006 1:26 pm ]
Post subject: 

stop it...

Author:  HPDesign [ Tue Nov 21, 2006 2:01 pm ]
Post subject: 

again you need to work out what types they are, and what you have got. Anything is possible it's all down to how much effort your prepared to go to.

Author:  cush [ Tue Nov 21, 2006 2:17 pm ]
Post subject: 

i think that's the answer right there.. :)

Author:  Harley [ Tue Nov 21, 2006 2:22 pm ]
Post subject: 

I can do it. 8)

Author:  GT [ Tue Nov 21, 2006 2:38 pm ]
Post subject: 

central locking....power windows....geesh...if you want these, buy a friggin Nissan Tida or Kia Rio..... :roll: :lol:

Author:  Harley [ Tue Nov 21, 2006 3:00 pm ]
Post subject: 

They make you pay for it as an extra on those cars.
Yes, even the Tida.........in the year 2006.
:D

Author:  GT [ Tue Nov 21, 2006 3:13 pm ]
Post subject: 

you're kidding? ripped off!

Author:  HPDesign [ Tue Nov 21, 2006 3:14 pm ]
Post subject: 

I don't think I would have a Kia, if you gave it too me I would rather have something worth owning. I think that's the point. Features where you want them, not where you don't. Power windows and Central locking are handy features However, all of this kits require modifications and skill. These are really simple modifications that could be done well, and provide a more modern driving experience. Me I don't mind "winding down for my AIR-CON" but other people like the mod con's. It's quite a simple DIY weekend for someone with a few tools, so well within reac of most miniers.

However, you have to work out if it's worth ayour time?

Author:  cush [ Tue Nov 21, 2006 3:17 pm ]
Post subject: 

HPDesign wrote:
Me I don't mind "winding down for my AIR-CON"


yeah yeah... mr fancy pants with your winding windows.. :)

Author:  KittyKat [ Tue Nov 21, 2006 3:17 pm ]
Post subject: 

get your car running first :lol:

Author:  sports850 [ Tue Nov 21, 2006 3:18 pm ]
Post subject: 

You'd be better off getting a rusted , cast off door from someone and experimenting with it rather than starting fresh onto your mini's doors , if it doesn't work and you stuff the door then it's only a scrap one , not your everyday drivers ....

Author:  _666_ [ Tue Nov 21, 2006 3:57 pm ]
Post subject: 

thanks for the somewaht useful answers and for those that arnt,,, yous can fiddle sticks off...paticularly cush.. nothing useful seems to come from him ever...

Author:  HPDesign [ Tue Nov 21, 2006 4:05 pm ]
Post subject: 

I know Cush is a pain in the proverbial But ask a vaigue question don't expect a proper answer. I said get specific's do a little research maybe get out to brickworks to see other locking/winding mechanisms and see how theyve got around it. Maybe you could do a proper installation guide or at least look into the kit's on the market

Without fail someone asks this question every 6 months and then never does any follow up on it, just do a search on this site I am sure you will find something, but I am sure you will get a million posts that don't go into specific's about it.

Author:  Mini Mike [ Tue Nov 21, 2006 4:07 pm ]
Post subject: 

hahaha take that cush

Page 1 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/