| ausmini https://www.ausmini.com/forums/ |
|
| Collins Round nose conversion updates https://www.ausmini.com/forums/viewtopic.php?f=2&t=25282 |
Page 1 of 1 |
| Author: | collins [ Sun Nov 26, 2006 12:38 am ] |
| Post subject: | Collins Round nose conversion updates |
Hi All, it has been a very busy weekend so far working on Ed. Update pics in members gallery. Go easy on the critisizm as it is my first time TIG welding.... http://www.ausmini.com/forums/viewtopic.php?p=328753#328753 |
|
| Author: | mini-dunger [ Sun Nov 26, 2006 2:43 am ] |
| Post subject: | good job dude |
Dont worry about ur welds, they look nice and solid. Thats a massive job your doing I hope it turns out well. It will take ages but it will definatly be worth it in the lond run. |
|
| Author: | collins [ Sun Nov 26, 2006 5:22 pm ] |
| Post subject: | |
The welds have good penetration, I turned the amps up to about 26-28 amps for light to medium panel work, and found a slight bead coming through the other side. For heavier work I turned the amps up to about 34-40 amps depending on what was being welded. I am really enjoying the TIG welding now, With the amps turned low and some slow patient welding I can really start to get it right. Quite relaxing.. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|