| ausmini https://www.ausmini.com/forums/ |
|
| Disc brake swap, 8.4's for 7.5's https://www.ausmini.com/forums/viewtopic.php?f=2&t=25329 |
Page 1 of 1 |
| Author: | doogie [ Mon Nov 27, 2006 5:25 pm ] |
| Post subject: | Disc brake swap, 8.4's for 7.5's |
I would like to go back to 10 inch wheels on my clubby, but it has 8.4 inch brakes on it, is there anyone who would like to do a straight swap? Just brake disc & caliper only, as they are inter changeable. Doogie |
|
| Author: | Lillee [ Mon Nov 27, 2006 5:35 pm ] |
| Post subject: | |
Graham has some 12x6 superlights with some low profile yokohama tyre which makes the overall outside diameter of the tyre is very very close to the same diameter as a 10inch tyre (within maybe 1 or 1/2 an inch). So that could be a solution doogie...cept the tyres are about $230 a corner... |
|
| Author: | buztoy [ Mon Nov 27, 2006 5:52 pm ] |
| Post subject: | |
do you want cooper or would you go civic 7.5's + $ |
|
| Author: | doogie [ Mon Nov 27, 2006 5:58 pm ] |
| Post subject: | |
My car has 12 inch superlights on it already, but i like the 10's better. Thanks but no thanks on the civic brakes, i just need a S disc & caliper. Doogie |
|
| Author: | miniza [ Mon Nov 27, 2006 6:14 pm ] |
| Post subject: | |
theyre not vented metro by any chance are they? |
|
| Author: | drmini in aust [ Mon Nov 27, 2006 6:14 pm ] |
| Post subject: | |
2 S's & a clubman wrote: My car has 12 inch superlights on it already, but i like the 10's better. Thanks but no thanks on the civic brakes, i just need a S disc & caliper.
Doogie S rotors won't fit on 8.4 drive flanges, they are way different. So ya may need S drive flanges too. 
|
|
| Author: | doogie [ Mon Nov 27, 2006 6:19 pm ] |
| Post subject: | |
Kev, i've swapped them over before with no dramas, the flanges on my MK1 are off a 1275 LS. Doogie |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|