| ausmini https://www.ausmini.com/forums/ |
|
| z https://www.ausmini.com/forums/viewtopic.php?f=2&t=25490 |
Page 1 of 1 |
| Author: | LordCruiser [ Fri Dec 01, 2006 7:08 pm ] |
| Post subject: | z |
zz |
|
| Author: | Morris 1100 [ Fri Dec 01, 2006 7:19 pm ] |
| Post subject: | Re: Apron, brakes, compression and stuff... |
LordCruiser wrote: 2. What's the compression pressure for the 1098? It ain't in my abridged workshop manual. Compression pressure is a variable. It depends on a lot of things. You can test an engine one day and have a different pressure the next. If you have a bigger overlap cam you will get less pressure on a gauge.
My 1100 has around 125psi in each cylinder. 
|
|
| Author: | AJ [ Fri Dec 01, 2006 8:18 pm ] |
| Post subject: | |
A normal compression would be around 140-150 psi , my 1098 has 175 psi on all cylinders , but it has had some work done to the head . Think pollution motor is lower , around 135 psi |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|