Stung..as in...did..Nar
| ausmini https://www.ausmini.com/forums/ |
|
| brake lines https://www.ausmini.com/forums/viewtopic.php?f=2&t=25492 |
Page 1 of 1 |
| Author: | mini-dunger [ Fri Dec 01, 2006 9:29 pm ] |
| Post subject: | brake lines |
herro I got stung 20beans for a brake line that goes from the junction to the subframe and to the pass side wheel. Is this fair? the thing is i need both first lines on the clutch and brake. Should I look around or just go back? Cheers guys and gals |
|
| Author: | drmini in aust [ Fri Dec 01, 2006 9:53 pm ] |
| Post subject: | |
I would rather fit new pipes than 30+ year old, if you are doing it properly. |
|
| Author: | doogie [ Fri Dec 01, 2006 9:55 pm ] |
| Post subject: | |
If it was a new peice of pipe flared & with new nuts, i'd call it a bargain, i know mini spares still have brand new original leyland stock subframe brake pipes for around $30 each. Doogie |
|
| Author: | gafmo [ Fri Dec 01, 2006 9:59 pm ] |
| Post subject: | |
Stung..as in...did..Nar
|
|
| Author: | drmini in aust [ Fri Dec 01, 2006 10:31 pm ] |
| Post subject: | |
I paid $23, 2 years ago for a new front pipe at B&R Brakes. Take your old ones to a decent brake shop, they have all the gear and fittings to make them properly. Fittings are copper plated too, so won't rust for a while... 
|
|
| Author: | Zizzle [ Fri Dec 01, 2006 11:51 pm ] |
| Post subject: | |
I paid $5 for the same, but supplied the fittings. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|