| ausmini https://www.ausmini.com/forums/ |
|
| A question about shafts https://www.ausmini.com/forums/viewtopic.php?f=2&t=2615 |
Page 1 of 1 |
| Author: | J_A_M [ Tue Nov 02, 2004 8:40 am ] |
| Post subject: | A question about shafts |
OK, I should read my book, but I want to ask for others experiences with drive stafts. I want to fit my front end maybe this weekend  . I have it almost assembled, but I wanted to bolt in the drive shafts when I fit it. By doing this, will I have to remove them when I fit my motor / box? Can you drop a motor / box in and slide the shafts out and back in without having to remove the swivel hubs?
|
|
| Author: | gafmo [ Tue Nov 02, 2004 8:49 am ] |
| Post subject: | |
Are dropping an Engine in Later. I droped Sue's in from the top with Pot Joints and Lost one Ball (Pickand Payless Time) and the shafts just push back in. Then do up the top ball joint Don't scatch the paint on the way In 
|
|
| Author: | J_A_M [ Tue Nov 02, 2004 9:00 am ] |
| Post subject: | |
so you can slide them away from the motor and then back into place, with the wheel end still bolted into the hub, and the hubs still inplace? |
|
| Author: | gafmo [ Tue Nov 02, 2004 9:25 am ] |
| Post subject: | |
Just drop the hub from the top Ball Joint. I also disconected the Tie-bar also which allowed it to swing out more |
|
| Author: | J_A_M [ Tue Nov 02, 2004 9:32 am ] |
| Post subject: | |
ok thanx mate, i figured i would have to do that. I put my Cooper S tapered rollers in last night. I have to clean up my CV's and bolt them in now. Subframe looks too good to drive with.  I am in love with that charcoal hammertone paint. I might do my fuel tank with it.
|
|
| Author: | gafmo [ Tue Nov 02, 2004 10:18 am ] |
| Post subject: | |
he's hooked on useing colour now  
|
|
| Author: | MiniK [ Tue Nov 02, 2004 10:23 am ] |
| Post subject: | |
So this threads about shafts hey.... Well ive got one mighty shaft
|
|
| Author: | gafmo [ Tue Nov 02, 2004 10:27 am ] |
| Post subject: | |
Onya |
|
| Author: | MiniK [ Tue Nov 02, 2004 10:32 am ] |
| Post subject: | |
gafmo wrote: Onya
lol...how tempting was it...plus its Antons thread
|
|
| Author: | gafmo [ Tue Nov 02, 2004 10:37 am ] |
| Post subject: | |
MiniK wrote: gafmo wrote: Onya plus its Antons thread Good Call
|
|
| Author: | J_A_M [ Tue Nov 02, 2004 10:47 am ] |
| Post subject: | |
| ...look at you two with ya heads bobbing away....
I am quite happy with 'my' shaft....so I don't need to talk it up 
|
|
| Author: | gafmo [ Tue Nov 02, 2004 11:25 am ] |
| Post subject: | |
Lets have a JAM.....Duf DUf DuF |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|