| ausmini https://www.ausmini.com/forums/ |
|
| Lock Barrel to Lock catch rod https://www.ausmini.com/forums/viewtopic.php?f=2&t=26573 |
Page 1 of 1 |
| Author: | thedog74 [ Tue Jan 09, 2007 1:33 pm ] |
| Post subject: | Lock Barrel to Lock catch rod |
Anyone got a photo of the rod that goes from the lock barrel to the door catch, for a clubman. The rod on mine is missing and would like to know what it looks like. thanks |
|
| Author: | Wombat [ Tue Jan 09, 2007 2:18 pm ] |
| Post subject: | |
Missing off both doors or one? - If one then it will be the mirror of the other Duh just reread the message - guess there is only one lockable door same as the MKI |
|
| Author: | AEG163job [ Tue Jan 09, 2007 5:10 pm ] |
| Post subject: | |
Can fax you the schematic from Minispares cat. if you want (sorry, no scanner  ).
Wombat, u r right the first time - locks on both doors (well on my clubbie anyway). referred to as an "operating link" in the book with only one part number so I guess they are not "handed" for LH/RH doors |
|
| Author: | thedog74 [ Tue Jan 09, 2007 6:40 pm ] |
| Post subject: | |
Missing off both doors. dont have a fax machine (not a working one anyway!) but thanks for the offer! |
|
| Author: | AEG163job [ Tue Jan 09, 2007 7:45 pm ] |
| Post subject: | |
doggy - can email you pics now if you give your address. R U sure yours are not resting in the bottom of your doors? 
|
|
| Author: | thedog74 [ Wed Jan 10, 2007 6:23 am ] |
| Post subject: | |
yep Ive looked in there and nothing there. email to [email protected]. thanks for all your help! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|