I'll let you know - just bought a cheap one off flea bay
Does the tool put the bead type nipple on the end of the tube or is that a separate fitting the double flared pipe butts up to?
| ausmini https://www.ausmini.com/forums/ |
|
| brake pipe flairing kit https://www.ausmini.com/forums/viewtopic.php?f=2&t=26700 |
Page 1 of 1 |
| Author: | Blokeinamoke [ Fri Jan 12, 2007 2:41 pm ] |
| Post subject: | brake pipe flairing kit |
Dnybody had any success with the diy kits. I have had several pipes made up with various success. All the pipes for the brakes I got made up are perfect, but the last couple for the cluch master to the hose have all leaked badly so I am seeing if DIY would be a better approach. |
|
| Author: | drmini in aust [ Fri Jan 12, 2007 2:55 pm ] |
| Post subject: | |
Most of the DIY ones now made in Taiwan or China are rubbish, as far as brake work using bundy tube is concerned. They do a sort-of passable job with copper, but copper brake pipes are illegal here. |
|
| Author: | Wombat [ Fri Jan 12, 2007 5:28 pm ] |
| Post subject: | |
I'll let you know - just bought a cheap one off flea bay
Does the tool put the bead type nipple on the end of the tube or is that a separate fitting the double flared pipe butts up to? |
|
| Author: | blumin [ Sat Jan 13, 2007 1:17 pm ] |
| Post subject: | Brake flare kits |
KC Tools make a reasonable kit for diy, the ProAm kit I remade all the pipes for the clubby & did not have one leak, but used all new nuts, expensive but well worth the effort. Blue |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|