| ausmini https://www.ausmini.com/forums/ |
|
| rubber in the rear pop windows https://www.ausmini.com/forums/viewtopic.php?f=2&t=26965 |
Page 1 of 1 |
| Author: | dale 62 [ Sat Jan 20, 2007 9:41 am ] |
| Post subject: | rubber in the rear pop windows |
hey i am after where i can get the rubber inside the channel of chrome work where the pop window sits in thanks |
|
| Author: | mad-mk1 [ Sat Jan 20, 2007 10:36 am ] |
| Post subject: | |
hey man do you have the original?? i would try minisport or clark rubber cheers |
|
| Author: | dale 62 [ Sat Jan 20, 2007 11:27 am ] |
| Post subject: | |
yeah i have the original its stuffd i rang minisport and they said they dont touch that and clark rubber gave me a couple samples im not sure which one to get though.. and i already wasted 25 bux on the wrong one and i dont intend on getting the wrong one again  thanks
|
|
| Author: | boho [ Sat Jan 20, 2007 11:55 am ] |
| Post subject: | |
Lost your glass, have you Dale? When my rear passenger window was smashed with a brick it turned out cheaper and easier to replace the whole window. (It's four screws to get in and out). Mine's a Rover and Brickworx in SA helped me out nearly overnight. 
Hope that helps. |
|
| Author: | drmini in aust [ Sat Jan 20, 2007 12:00 pm ] |
| Post subject: | |
There are so many s/h rear side windows about in good nick, just change em. 
All Oz ones are the same Mk1 type, from `61 850 to `78 LS. |
|
| Author: | Clubbie74 [ Sat Jan 20, 2007 12:10 pm ] |
| Post subject: | |
They come up on ebay every couple of months or try the wanted section. http://cgi.ebay.com.au/LEYLAND-MINI-REA ... dZViewItem In Melbourne If you feel like a drive. |
|
| Author: | dale 62 [ Sat Jan 20, 2007 12:31 pm ] |
| Post subject: | |
thanks guy i have the glass i just saw the old rubber was stuffed and instead of me checking out the window i couldnt use i ruined my chances on using my good one 2 by taking it apart |
|
| Author: | rampage101 [ Sat Jan 20, 2007 2:34 pm ] |
| Post subject: | |
I also need the rubber only, as I'm a window tinter by trade now I pulled the glass completely out to get a perfect finish (although the glass is scratched and has overspray and grinding splatter  ) because the rubber hold dust and it gets sucked up into the tint. My rubber was really shagged anyway, so can you get it? Or do i just need to make my own?
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|