There was an article on them in The Mini Experience magazine, I think 2 issues ago. Regardless, here are the contact details.
Russell Engineering
113 North Rocks Rd
North Rocks 2151
(02) 9630 2195
| ausmini https://www.ausmini.com/forums/ |
|
| Extractors ?? https://www.ausmini.com/forums/viewtopic.php?f=2&t=27485 |
Page 1 of 1 |
| Author: | 8a8y8 [ Wed Jan 31, 2007 10:26 am ] |
| Post subject: | Extractors ?? |
what extractors will you use if your car is being bored out from a 1275 to a 1360? and which extractor will i gain most power from thanks |
|
| Author: | czerial [ Wed Jan 31, 2007 10:30 am ] |
| Post subject: | |
Russell Engineering's Supapipes. why are you going to 1360 mate? just stick with a 1293 |
|
| Author: | 1360 LS [ Wed Jan 31, 2007 10:47 am ] |
| Post subject: | |
Yeah safe the boring till you need to goto 1360.... if its 1275 atm goto 1293 if its 1293 .. 1310.. if its 1310 goto 1330 and then if is 1330 already then and only then should you goto 1360 or above. Supapipes for sure! on the extractor question for power. |
|
| Author: | WasabiPimpNinja [ Wed Jan 31, 2007 11:53 am ] |
| Post subject: | |
What are a set of Supapipes worth? I need some new extractors for my 1360 Clubby. Also I have a centre exit exhaust, would they work with my current setup or will I need a whole new back section as well? If so does GR supply these aswell? Peace. |
|
| Author: | Lillee [ Wed Jan 31, 2007 2:13 pm ] |
| Post subject: | |
maniflow LCB |
|
| Author: | Rookiepilot [ Wed Jan 31, 2007 2:16 pm ] |
| Post subject: | |
A set of Brownriggs |
|
| Author: | 8a8y8 [ Wed Jan 31, 2007 4:08 pm ] |
| Post subject: | |
czerial wrote: Russell Engineering's Supapipes.
why are you going to 1360 mate? just stick with a 1293 what extractors are they i done a search and nothing seems to pop up |
|
| Author: | speedy [ Wed Jan 31, 2007 4:32 pm ] |
| Post subject: | |
There was an article on them in The Mini Experience magazine, I think 2 issues ago. Regardless, here are the contact details.
Russell Engineering 113 North Rocks Rd North Rocks 2151 (02) 9630 2195 |
|
| Author: | drmini in aust [ Wed Jan 31, 2007 6:43 pm ] |
| Post subject: | |
WasabiPimpNinja wrote: What are a set of Supapipes worth? I need some new extractors for my 1360 Clubby. Also I have a centre exit exhaust, would they work with my current setup or will I need a whole new back section as well? If so does GR supply these aswell?
Peace. Graham's Supapipes are around $450 I think. They work wonders on a smallbore, but for a 1360 or bigger he thinks the 3 downpipes are a trifle small. He only supplied the extractors, you need to get the rest elsewhere. I run a Maniflow medium bore LCB on my 1360 with a 2" system, and it goes like stink..
|
|
| Author: | WasabiPimpNinja [ Thu Feb 01, 2007 7:50 am ] |
| Post subject: | |
drmini in aust wrote: I run a Maniflow medium bore LCB on my 1360 with a 2" system, and it goes like stink..
Yere, I was looking at a Maniflow system. Still might be the go then seeing as my local Mini Shop has a set or two in stock, save on postage. |
|
| Author: | AEG163job [ Thu Feb 01, 2007 9:23 am ] |
| Post subject: | |
Maniflow - good quality & performance at a sensible price. That's my two bob's worth |
|
| Author: | czerial [ Thu Feb 01, 2007 12:13 pm ] |
| Post subject: | |
yeah i have maniflow on mine. im really happy 
|
|
| Author: | poeee [ Thu Feb 01, 2007 1:05 pm ] |
| Post subject: | |
I'm very impressed with the quality of Maniflow LCB's. Great design, great quality. Would be on my car if it didn't have LCB's on it when I bought it. Also heard good things about GR's Supapipes, best have a chat to Graham. |
|
| Author: | Molina [ Thu Feb 01, 2007 1:39 pm ] |
| Post subject: | |
drmini in aust wrote: I run a Maniflow medium bore LCB on my 1360 with a 2" system, and it goes like stink.. I run the medium bore Maniflow extractors on my 1330 and i'm pretty happy too.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|