Hi all,
Does anyone know what the bore size of the Mazda MC people are using, apparently theres a couple different sizes.
was given these to figures but they could be wrong, are these similier sizes to the mini tandom MC 13/16 20.64 ?????
steve
| ausmini https://www.ausmini.com/forums/ |
|
| Mazda tandom brake Master cylinder bore size?????????????? https://www.ausmini.com/forums/viewtopic.php?f=2&t=27722 |
Page 1 of 1 |
| Author: | sunburst [ Tue Feb 06, 2007 6:26 pm ] |
| Post subject: | Mazda tandom brake Master cylinder bore size?????????????? |
Hi all, Does anyone know what the bore size of the Mazda MC people are using, apparently theres a couple different sizes. was given these to figures but they could be wrong, are these similier sizes to the mini tandom MC 13/16 20.64 ????? steve
|
|
| Author: | DOZ [ Tue Feb 06, 2007 6:38 pm ] |
| Post subject: | |
My tandem cylinder (std late mini) is 0.70" Daniel |
|
| Author: | sunburst [ Tue Feb 13, 2007 6:23 pm ] |
| Post subject: | |
im not to good with my iches lol, is that close to 13/16 Cheers
|
|
| Author: | kiwiinwgtn [ Tue Feb 13, 2007 6:40 pm ] |
| Post subject: | |
to work out fractions to decimal you divide the first number by the second so 13/16 equals 0.8125 hope this hepls |
|
| Author: | 92 [ Wed Feb 14, 2007 12:29 pm ] |
| Post subject: | |
The RWD mazda 121 master cylinder that I use has a 13/16 bore |
|
| Author: | DOZ [ Wed Feb 14, 2007 4:28 pm ] |
| Post subject: | |
0.70" ~45/64" = 17.78mm 0.75" = 3/4" = 19.05mm 0.8125 = 13/16" = 20.64mm A bigger master cylinder will give more fluid movement. This will have a couple of effects, mainly the pedal will 'take-up' quicker & the pressure required by your foot will be higher. The area difference between the 0.70" and 13/16" suggests 25-35% more force required on the pedal for the same line pressure. I don't know if your application would suit either cylinder size, best to consult a mechanic or brake specialist before changing anything. Regards Daniel |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|