ausmini
https://www.ausmini.com/forums/

BMC Rosette - pic or scan copy please
https://www.ausmini.com/forums/viewtopic.php?f=2&t=28190		 Page 1 of 1
Author:  Mike_Byron [ Sat Feb 17, 2007 10:23 am ]
Post subject:  BMC Rosette - pic or scan copy please
I am after a good quality photo or scan of the BMC rosette. Good enough for me to photoshop and get some made up. I will happily share copies with people who help me.

PM me for my email addy.
Author:  graham in aus [ Sat Feb 17, 2007 10:45 am ]
Post subject: 
Which one! :?
Image
Image
There is a special tuning one too,
You probably need better definition than that? :roll:
Author:  ziff [ Sun Feb 18, 2007 6:16 am ]
Post subject: 
Mike,
Here's a not too bad one from Wikipedia.

http://en.wikipedia.org/wiki/Image:BMC_rosette.png

Ziff
Author:  Mike [ Sun Feb 18, 2007 7:48 am ]
Post subject: 
Why bother? They're like 80p from MiniSpares UK.
Author:  mini-mini [ Sun Feb 18, 2007 11:06 pm ]
Post subject: 
Yes, I've been hunting for an EPS vector art version of the Rosette for some time now, but with no luck.
Author:  chopchop [ Wed Feb 21, 2007 2:21 am ]
Post subject: 
i've got an eps version back in oz, so you might have to do what i done and sit and draw it using illustrator, unless you can wait till may when im back
Author:  mini-mini [ Wed Feb 21, 2007 12:00 pm ]
Post subject: 
Thanks for the offer Chop-Chop! :)

If I find the time, I'll re-draw it, but with my work load at the moment, May looks okay!
Author:  Wombat [ Wed Feb 21, 2007 1:45 pm ]
Post subject: 
What is the diameter of the rosette?
Author:  mini-mini [ Wed Feb 21, 2007 1:55 pm ]
Post subject: 
There is no set size. The diameter is dependent on the application, hence the need for a scalable vector file.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/