ausmini
https://www.ausmini.com/forums/

mk1 cooper s boot lid
https://www.ausmini.com/forums/viewtopic.php?f=2&t=28230
Page 1 of 1

Author:  badassmini [ Sun Feb 18, 2007 12:34 pm ]
Post subject:  mk1 cooper s boot lid

hey guys does anyone have any pics of what a mk1 cooper s boot lid looks like or are they the same as a normal boot lid
cheers

Author:  drmini in aust [ Sun Feb 18, 2007 1:42 pm ]
Post subject:  Re: mk1 cooper s boot lid

badassmini wrote:
hey guys does anyone have any pics of what a mk1 cooper s boot lid looks like or are they the same as a normal boot lid
cheers

All Oz Mini boot lids from 1965 on are the same, all that varies is where the badge holes are put. :wink:

Author:  Mick [ Sun Feb 18, 2007 2:04 pm ]
Post subject: 

Cooper S also has many small drill holes around the inside of the bootlid to mount the fibreboard boot cover.

Author:  badassmini [ Mon Feb 19, 2007 1:33 pm ]
Post subject: 

what about pre 65

Author:  cush [ Mon Feb 19, 2007 1:40 pm ]
Post subject: 

Mick wrote:
Cooper S also has many small drill holes around the inside of the bootlid to mount the fibreboard boot cover.


um... that wouldn't be attached to the boot lid, would it?

here's my arse.... excuse the "exhaust".... (old joke)

Image

Author:  badassmini [ Mon Feb 19, 2007 1:44 pm ]
Post subject: 

thats the boot lid i was talking about what model mini is that off

Author:  sports850 [ Mon Feb 19, 2007 1:45 pm ]
Post subject: 

OK , that's an early bootlid that was mostly on morris 850's and 997 coopers , I think it had changed by the time 998 coopers were released but not sure . Basically it's a UK bootlid made to take their wider number plates .

Author:  cush [ Mon Feb 19, 2007 1:49 pm ]
Post subject: 

yup... early "proper" bootlid..:)

Author:  badassmini [ Mon Feb 19, 2007 1:55 pm ]
Post subject: 

are they a rare boot lid to find so there off a cooper not a cooper s

Author:  sports850 [ Mon Feb 19, 2007 1:58 pm ]
Post subject: 

They are mostly off 850's but the very first cooper's in Aust had them too I think before they switched to the australian number plate width somewhere around 1964 . They are fairly rare now mainly due to the age and often twice the cost of a good normal bootlid .

Author:  badassmini [ Mon Feb 19, 2007 2:03 pm ]
Post subject: 

cool how much do you think i would pay for one as im chasing one

Author:  sports850 [ Mon Feb 19, 2007 2:10 pm ]
Post subject: 

You've got to find one first , and find one without rust as they haven't been used for about 43 years or more . I've seen them go for around $150 to $200 but you can always be lucky and get them cheaper .

Author:  badassmini [ Mon Feb 19, 2007 2:14 pm ]
Post subject: 

cheers mate

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/