As much as I hate to agree with young Willster
just grab the plans and build one yourself...then you know it will be done right 
| ausmini https://www.ausmini.com/forums/ |
|
| Where to buy mini boot board kits? https://www.ausmini.com/forums/viewtopic.php?f=2&t=28706 |
Page 1 of 2 |
| Author: | YoungMiniac [ Thu Mar 01, 2007 5:01 pm ] |
| Post subject: | Where to buy mini boot board kits? |
I am after one of the carpeted boot board kits from my mini clubman, can anyone tell me where I can buy one? |
|
| Author: | Wombat [ Thu Mar 01, 2007 5:03 pm ] |
| Post subject: | |
There's a guy selling them on the UK eBayhttp://cgi.ebay.co.uk/Boot-Liner-Lining-Kit-for-the-Classic-Mini_W0QQitemZ140088441525QQihZ004QQcategoryZ43122QQrdZ1QQcmdZViewItem |
|
| Author: | YoungMiniac [ Thu Mar 01, 2007 5:43 pm ] |
| Post subject: | |
Anyone in Aussie? |
|
| Author: | willy [ Thu Mar 01, 2007 5:44 pm ] |
| Post subject: | |
I was going to make them, but I am lazy. They are a piece of piss. Trim them in a light-ish material to make it a bit more 'modern' |
|
| Author: | 9YaTaH [ Thu Mar 01, 2007 6:59 pm ] |
| Post subject: | Build it...and they will come! |
As much as I hate to agree with young Willster just grab the plans and build one yourself...then you know it will be done right
|
|
| Author: | 1360 LS [ Thu Mar 01, 2007 7:12 pm ] |
| Post subject: | Re: Build it...and they will come! |
9YaTaH wrote: As much as I hate to agree with young Willster
just grab the plans and build one yourself...then you know it will be done right plans??? where??? and what materials? |
|
| Author: | steve1965 [ Thu Mar 01, 2007 7:21 pm ] |
| Post subject: | Boot Board |
Have a go at making one they are really simple, it only take's a few hours. Steve |
|
| Author: | 1360 LS [ Thu Mar 01, 2007 7:27 pm ] |
| Post subject: | |
That's what Im saying I will do... jsut to semi-hijack the thread. But plans would be nice .... otherwise what materials would be best suited for this project? |
|
| Author: | sox61 [ Thu Mar 01, 2007 7:59 pm ] |
| Post subject: | |
I made mine from scratch to suit amps etc. but this link may help u.. http://www.minifinity.com/modules.php?op=modload&name=TechLibrary&file=doku&id=boot_board_dimensions |
|
| Author: | steve1965 [ Thu Mar 01, 2007 8:01 pm ] |
| Post subject: | Boot Kit |
When i made mine i used MDF. At the front of the tank i used 3mm. and all of the other pieces including the two side's and the back board, behind the rear seat also the bottom of the boot ontop of the spare wheel i used 6mm. I bought the carpet from clark rubber, and i used kwik glue I think thats how you spell it, from bunnings. Steve |
|
| Author: | My_Mini_Rocks [ Thu Mar 01, 2007 9:15 pm ] |
| Post subject: | Boot board |
Hey, We make these, i have one almost exact to the 'S' type in my mini K with single tank. We make them sit on top of the spare (for single tank mini's). The corner that the 'S' twin tank sits on is covered. I am sure we could the carpeted instead of 'S' trim Andrew.. PM me for a price.....ill try not to shock.
|
|
| Author: | 1360 LS [ Fri Mar 02, 2007 7:08 am ] |
| Post subject: | Re: Boot Kit |
steve1965 wrote: When i made mine i used MDF. At the front of the tank i used 3mm. and all of the other pieces including the two side's and the back board, behind the rear seat also the bottom of the boot ontop of the spare wheel i used 6mm. I bought the carpet from clark rubber, and i used kwik glue I think thats how you spell it, from bunnings.
Steve kwik glue?? that's that contact adhesive? cheers on the info mate I'll check it out. I'm just getting idea's for this year's projects. As we all know there's always something you can do to or for your beloved Mini. |
|
| Author: | weevel [ Fri Mar 02, 2007 9:09 am ] |
| Post subject: | |
When I made mine I got a bit too keen with the staple gun and forgot to use the contact adhesive! It's not bad though, I kept it pretty tight with the stapling and unless you look for it you'd never know. Here's what mine look like (used minifinity plans, 3mm (tank), 6mm (back & sides) & 9mm (base) MDF & car carpet from Bunnings) 
Since I took these pics I also made up some carpeted cards to fit into the recessed bits on the inside of the boot lid just to finish it off. |
|
| Author: | 1360 LS [ Fri Mar 02, 2007 10:10 am ] |
| Post subject: | |
^^^ Looks great!!! thanks for the pics got a idea now what it should roughly look like cheers |
|
| Author: | sports850 [ Fri Mar 02, 2007 10:15 am ] |
| Post subject: | |
As a slightly different idea I saw this following a link from mz.mini's post in the members gallery , http://www.aafabrications.com/bodykit.htm , they do some interesting other bits and pieces for mini's too . |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|