ausmini
https://www.ausmini.com/forums/

shocking lol
https://www.ausmini.com/forums/viewtopic.php?f=2&t=28745
Page 1 of 1

Author:  MiniMan_Alis [ Fri Mar 02, 2007 7:06 pm ]
Post subject:  shocking lol

would these be alright for my '66 deluxe wit hydro (obviously take the hydro out)

http://cgi.ebay.com.au/MINI-COOPER-GAZ- ... dZViewItem

do i need shocks too
http://cgi.ebay.com.au/MINI-SHOCKER-KIT ... dZViewItem

Author:  supercharged 850 [ Sat Mar 03, 2007 1:13 am ]
Post subject: 

I think you need rubber cone type top arms and trailing arms to make these fit.

I'd stick with the hydro, personally.

Author:  mini bug [ Sat Mar 03, 2007 6:20 am ]
Post subject: 

There is no need to change the suspenion arms on a hydro mini to dry type . To fit coil overs to a hydro mini you will need to replace the rear stub axle with a dry suspension type. You also may need to enlarge/drill out the hole on the top front arms where the front bump stops are bolted to.The coil overs are shocks and springs.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/