G'day Folks

I just need some help with a HS6 I picked up.

The plan is to use it in a single carby configuration on a Minispares style manifold. Excuse my ignorance but why so many pipes on to of the float bowl lid? One I assume in the inlet and onother maybe an overflow but the 3rd pipe that runs back into the carby body (near the bottom arrow on the pic) has me scratching my head. What do I need to do to the Carby to set it up for use as a single??

Many thanks in advance for your help!

_________________
Car 1972
Variety Bash Mini
Brisbane to Busby's Bore
8-17 August 2014

Like us on Facebook at
https://www.facebook.com/Car1972NSWVari ... e=bookmark

It`s a breathing balance pipe, it`s meant to help stop the carb running too rich as the air filter starts to get blocked/choked up with crud

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

Thanks for the answer "Real Mini Man"

_________________
Car 1972
Variety Bash Mini
Brisbane to Busby's Bore
8-17 August 2014

Like us on Facebook at
https://www.facebook.com/Car1972NSWVari ... e=bookmark