Someone should tell adeee...
| ausmini https://www.ausmini.com/forums/ |
|
| 8.4" discs on e-bay https://www.ausmini.com/forums/viewtopic.php?f=2&t=29783 |
Page 1 of 1 |
| Author: | AEG163job [ Wed Mar 28, 2007 5:12 pm ] |
| Post subject: | 8.4" discs on e-bay |
Cheap & less than 3 days to go. http://cgi.ebay.com.au/Moke-Californian ... dZViewItem |
|
| Author: | poeee [ Wed Mar 28, 2007 5:14 pm ] |
| Post subject: | |
Someone should tell adeee...
|
|
| Author: | badassmini [ Wed Mar 28, 2007 8:02 pm ] |
| Post subject: | |
will these fit onto a mini if so is there anything else i would need to get to put these onto mini or will they just bolt strieght on. cheers dan |
|
| Author: | simon k [ Wed Mar 28, 2007 8:19 pm ] |
| Post subject: | |
badassmini wrote: will these fit onto a mini if so is there anything else i would need to get to put these onto mini or will they just bolt strieght on.
cheers dan aside from needing a good check over and replacement of anything worn, they'll go right on |
|
| Author: | badassmini [ Wed Mar 28, 2007 8:31 pm ] |
| Post subject: | |
if i buy them ill rebuild them are these the 4 piston type calipers to. |
|
| Author: | drmini in aust [ Wed Mar 28, 2007 8:47 pm ] |
| Post subject: | |
badassmini wrote: if i buy them ill rebuild them are these the 4 piston type calipers to.
Standard 8.4 Mini/Moke ones are 2 piston, solid discs. same as a 1275LS. |
|
| Author: | gafmo [ Wed Mar 28, 2007 8:56 pm ] |
| Post subject: | |
you will need 12's or 13' Wheels thou |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|