No eye deer
,,,hopefully someone will have first hand experience
| ausmini https://www.ausmini.com/forums/ |
|
| Fuel pump question https://www.ausmini.com/forums/viewtopic.php?f=2&t=29915 |
Page 1 of 1 |
| Author: | Mowog [ Sat Mar 31, 2007 10:23 pm ] |
| Post subject: | Fuel pump question |
Hi all. Just sourced a near new mechanical pump to replace a broken, later type, non repairable pump on my 77 clubby. Looks like a Goss pump, but slightly different top. It has a plastic rubbing block that sits on the cam. The only markings are the letters EH stamped into the top. My original pump had a plastic insulator/spacer about half inch thick & my gasket set has one in it which is about 3/8 inch thick with gaskets already glued in place. Question is, any way of knowing which spacer to use if at all? The guy I got it from couldn't help. Thanks. Scotty. |
|
| Author: | 9YaTaH [ Sat Mar 31, 2007 11:04 pm ] |
| Post subject: | Gosh!! |
No eye deer ,,,hopefully someone will have first hand experience
|
|
| Author: | 9YaTaH [ Sat Mar 31, 2007 11:13 pm ] |
| Post subject: | Gosh!! |
hope someone can help mate... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|