ausmini
https://www.ausmini.com/forums/

for those who doubted me
https://www.ausmini.com/forums/viewtopic.php?f=2&t=30017
Page 1 of 2

Author:  tinymorris1969 [ Tue Apr 03, 2007 9:29 pm ]
Post subject:  for those who doubted me

for all of u who doubted my mechanical skills, i have proved u's all wrong by doing my own wheel bearings (fronts disks) at home, only because it was a lazy sunday arvo with nothing to do and had time to kill and plus the bearing craped itself so i had no choice... lol it only took me 3 hrs and alot of swearing but ive learned how to do it though

Author:  slinkey inc [ Tue Apr 03, 2007 9:32 pm ]
Post subject: 

good work. :wink:

Author:  Mike_Byron [ Tue Apr 03, 2007 9:38 pm ]
Post subject: 

Joe - onya mate.
The more you do the better you will feel.

You know you can do it even if you havn't already done it.

Author:  Mick [ Tue Apr 03, 2007 10:15 pm ]
Post subject: 

There is no blacker grease, nor sharper edges to jag your hands on than those found under the guards of a mini.
Except maybe for a jag....

Now you're initiated in mini maintenance.

Author:  gerg [ Tue Apr 03, 2007 11:24 pm ]
Post subject: 

Thats great news Joe, maaaate , seeing you live close to me maybe you can do mine......... :wink:

Gerg...

Author:  Blokeinamoke [ Tue Apr 03, 2007 11:44 pm ]
Post subject: 

You show the bastards -

Author:  mad-mk1 [ Tue Apr 03, 2007 11:57 pm ]
Post subject: 

good effort man, now u have started u wont be able to stop!!

Author:  sports850 [ Wed Apr 04, 2007 6:51 am ]
Post subject: 

Well done , they aren't as scary as they seem are they .

Author:  Betty [ Wed Apr 04, 2007 12:12 pm ]
Post subject: 

gerg wrote:
Thats great news Joe, maaaate , seeing you live close to me maybe you can do mine......... :wink:

Gerg...
:lol: :lol:

Author:  Rodney [ Wed Apr 04, 2007 5:18 pm ]
Post subject: 

Well done, when I did mine, I just about tossed the lot in the rubbish.

Hooroo

Author:  tinymorris1969 [ Wed Apr 04, 2007 6:50 pm ]
Post subject: 

yeah sure greg anything uptop i can do no probs juz anything that requires are jack i rather not do at home unless its urgent like this wheel bearing lol but it left me sitting there for about an hour wondering how to get the driveshaft out without taking out the hub but i ended up taking the hubs out anyway lol

Author:  gafmo [ Wed Apr 04, 2007 6:59 pm ]
Post subject: 

Great job...the first one is always the hardes...You may as well do the other side now...if one has gone the other maybe close also...plus the experiance is a great lesson....See Em you could possibley do it also :lol:

Author:  tinymorris1969 [ Wed Apr 04, 2007 7:57 pm ]
Post subject: 

lol the only thing i had trouble with was the stupid seal so atm im hoping its ok cause i forgot how to put it back in and how far lol

Author:  Betty [ Thu Apr 05, 2007 12:17 am ]
Post subject: 

gafmo wrote:
Great job...the first one is always the hardes...You may as well do the other side now...if one has gone the other maybe close also...plus the experiance is a great lesson....See Em you could possibley do it also :lol:


i dont need to know how..
all the men in my lives already know .. (so i can just ask nicely) :P

Author:  Hanra [ Thu Apr 05, 2007 7:24 am ]
Post subject: 

Did u tighten the wheel nuts back up? Or do u need to take it to a Mini Specialist to do that?

Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/