| ausmini https://www.ausmini.com/forums/ |
|
| What extractors to use? https://www.ausmini.com/forums/viewtopic.php?f=2&t=30177 |
Page 1 of 1 |
| Author: | mooman10_0 [ Sun Apr 08, 2007 4:31 pm ] |
| Post subject: | What extractors to use? |
Am at the stage of painting my engine and putting in, and I have three sets of extractors to choose from. The engine is a pretty stock 1275 with twin su's, the extractors I have are: 1. 3 into 1 all nicely painted black (no brand) 2. Perry extractors, 2 into 1 then into a two pipe elbow piece which goes into 1.75 inch exhaust (complete) or 3. What I have been told are genuine 3 into 1 cooper s extractors, but they would need some work as they have a couple of holes and dents. What would be best? as I have no idea which way to go? Thankyou |
|
| Author: | Mike_Byron [ Sun Apr 08, 2007 4:52 pm ] |
| Post subject: | |
My vote is for the Long Centre Branch (LCB) ones which is what I think you are describing the 2 into 1 type as. These work well with a big bore as others will probably tell you. |
|
| Author: | drmini in aust [ Sun Apr 08, 2007 5:26 pm ] |
| Post subject: | |
I agree with Mike. I've got LCB on one car and Perry freeflow 3-1 on the other. |
|
| Author: | 69elf [ Sun Apr 08, 2007 5:28 pm ] |
| Post subject: | |
Doesn't matter what the question is, the answer is LCB |
|
| Author: | Spaceboy [ Sun Apr 08, 2007 5:30 pm ] |
| Post subject: | |
2. |
|
| Author: | gafmo [ Sun Apr 08, 2007 5:31 pm ] |
| Post subject: | |
3rd it |
|
| Author: | mooman10_0 [ Sun Apr 08, 2007 6:03 pm ] |
| Post subject: | |
Looks like no.2 it will be. Thanks guys |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|