Hi all, I have done a search, is turps or petrol the best for getting the black sealant crap off the firewall.
Cheers
M
| ausmini https://www.ausmini.com/forums/ |
|
| Removing Black Sealant on Firewall etc https://www.ausmini.com/forums/viewtopic.php?f=2&t=3067 |
Page 1 of 1 |
| Author: | minstar [ Thu Nov 25, 2004 9:46 am ] |
| Post subject: | Removing Black Sealant on Firewall etc |
Hi all, I have done a search, is turps or petrol the best for getting the black sealant crap off the firewall.
Cheers M |
|
| Author: | J_A_M [ Thu Nov 25, 2004 10:09 am ] |
| Post subject: | |
I used a paint scraper, flat blade screwdriver, wire wheel on drill, then petrol. |
|
| Author: | czerial [ Thu Nov 25, 2004 10:27 am ] |
| Post subject: | |
i used a big chisel on mine, gets it off nicely, but dont get excidet and scratch the metal and that just nice and gentle and it comes off real easy. and then petrol... |
|
| Author: | 13secmini [ Thu Nov 25, 2004 12:36 pm ] |
| Post subject: | |
you wouldnt believe it, but some guys in japan that build drag cars actually use dry ice to freeze it then it just chips off. |
|
| Author: | 1380 yellow devil [ Thu Nov 25, 2004 2:15 pm ] |
| Post subject: | |
doesent petrol leave a sllight oily residue on the surface. I not to sure if it does or not. I would pefer to use turps of thinners, but do no get thinners on plastic as it softens it very fast. |
|
| Author: | Wombat [ Thu Nov 25, 2004 3:29 pm ] |
| Post subject: | |
13secmini wrote: you wouldnt believe it, but some guys in japan that build drag cars actually use dry ice to freeze it then it just chips off.
Why not some liquid nitrogen like the Droctors use to burn off skin cancers Cleaner than using all that petrol and stuff |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|