Tooth counts- from Vizard HTMYM-
3.44= 18/62
3.647= 17/62
3.765= 17/64
3.928= 16/63
4.133= 15/62
4.267= 15/64
Yep they are all interchangeable.
the 17T and 15T pinions each fit both crownwheels listed.
| ausmini https://www.ausmini.com/forums/ |
|
| moke/mini boxes https://www.ausmini.com/forums/viewtopic.php?f=2&t=3091 |
Page 1 of 1 |
| Author: | danidad [ Fri Nov 26, 2004 10:28 pm ] |
| Post subject: | moke/mini boxes |
just scored 5x motors 850, 1000 and 1100 and a 1500 which i think is morris major also used in MG?? also some spare boxes..assorted doors,boots and bonnets also a moke bonnet, that morris 1000 uteback anyway the question is......... are moke boxes different than mini ones????. i think some of the boxes came from mokes, and as i just got home and its dark (there still on the trailer) so i cant see numbers etc...hard to tell. wondered if they were like 1100's or mini and if the gears were different as the moke has bigger wheels (doesnt it)???? |
|
| Author: | Morris 1100 [ Fri Nov 26, 2004 10:47 pm ] |
| Post subject: | |
Good work! I think the only difference between the moke and the mini was the final drive ratio. From the workshop manual. Cooper S has 3.44-1 final drive ratio mini K 1100 has 3.65-1 mini 850 has 3.765-1 10" wheel moke has 4.13-1 13' wheel moke has a 4.27-1 |
|
| Author: | danidad [ Fri Nov 26, 2004 11:57 pm ] |
| Post subject: | |
OK thanks mate... are they interchangeable? and is there tooth count so you can tell which your looking at? |
|
| Author: | drmini in aust [ Sat Nov 27, 2004 5:13 am ] |
| Post subject: | |
Tooth counts- from Vizard HTMYM- 3.44= 18/62 3.647= 17/62 3.765= 17/64 3.928= 16/63 4.133= 15/62 4.267= 15/64 Yep they are all interchangeable. the 17T and 15T pinions each fit both crownwheels listed.
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|