ausmini
https://www.ausmini.com/forums/

Fitted up the Intercooler
https://www.ausmini.com/forums/viewtopic.php?f=2&t=31140		 Page 1 of 2
Author:  Boostedmini [ Thu Apr 26, 2007 2:11 pm ]
Post subject:  Fitted up the Intercooler
Hi All,

its about time i update you on my mini, I have all but finally finished fitting the intercooler to the mini.

see the series of pics below, have not got the EDIS ignition totally sorted yet so i cant quote any intake temp figures yet but before the cooler the intake temp was getting to 110 degrees on 13psi so i knew it was time to act on the cooler install.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Author:  cush [ Thu Apr 26, 2007 2:19 pm ]
Post subject: 
nice and snug... :)
Author:  willy [ Thu Apr 26, 2007 2:27 pm ]
Post subject: 
Yummo!
10/10 for positioning :wink:
Author:  slinkey inc [ Thu Apr 26, 2007 2:55 pm ]
Post subject: 
Good placement of back-up hammer in sixth pic. You never know when you might need one. :lol:

Yes very good, I like, snug and hidden. 8)
Author:  Hanra [ Thu Apr 26, 2007 3:06 pm ]
Post subject: 
You reckon the bonnet will shut without mods? Looks like it mite foul on the pipework....
Author:  slinkey inc [ Thu Apr 26, 2007 3:12 pm ]
Post subject: 
I've seen some stuff on turbominis that you wouldn't think would fit but does JUST, if you take out the reinforcement for the bonnet.

It'll be interesting to see it all does fit.
Author:  DOZ [ Thu Apr 26, 2007 4:13 pm ]
Post subject: 
Nice one, 'bout time though!

Daniel
Author:  Lillee [ Thu Apr 26, 2007 4:33 pm ]
Post subject: 
I've seen it in person. It looks hot and it will probably go just as hot! 8)
Author:  Boostedmini [ Thu Apr 26, 2007 5:01 pm ]
Post subject: 
hanra,

do you think i would go to this trouble not knowing if it would fit under the bonnet?
it all fits easy without any mods to the reinforceing too.

as for the hammer, as you said you just never know lol.

Grant
Author:  Hanra [ Thu Apr 26, 2007 5:45 pm ]
Post subject: 
Good one then... Well ya just dont know...

I was only just reading a story about a guy who was doing up a kingswood for the summernats, he didnt like the dimpled sections in the inner guards, so he filled them in so it was nice and smooth, then once the front end was all fitted up, he went to close the bonnet and smashed the bonnet hinges into the freshly smoothed guards.....

The dimpled section is there to give clearance for the bonnet hinges...
Author:  poeee [ Thu Apr 26, 2007 6:02 pm ]
Post subject: 
Looks the goods mate, very impressed. 8)
Author:  justminis [ Thu Apr 26, 2007 8:59 pm ]
Post subject: 
Very neat install Grant, and what now, even more power :D :D

Half your luck, will be even wilder beast to drive.
regards
Author:  gafmo [ Thu Apr 26, 2007 9:14 pm ]
Post subject: 
Grant she's looking Brilliant..can't wait to see it on the 5th :wink:
Author:  michaelb [ Thu Apr 26, 2007 9:48 pm ]
Post subject:  Intercooler
Hi,
Looks good, very neat.
I have just purchased a Metro Turbo T3 kit with a similar intercooler, so I am very interested in your setup as I think mine will be similar? 1275LS waiting for my other mini resto projects to be completed before I can start the Turbo resto and build.
What happens with the brake booster :?:
Author:  gafmo [ Thu Apr 26, 2007 9:50 pm ]
Post subject: 
Not happy just got told your going to the Dyno Day :cry:
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/