As far as I know they shouldn't be hitting.
| ausmini https://www.ausmini.com/forums/ |
|
| LS RIMS https://www.ausmini.com/forums/viewtopic.php?f=2&t=31197 |
Page 1 of 1 |
| Author: | kaka [ Sat Apr 28, 2007 11:14 am ] |
| Post subject: | LS RIMS |
Hi, My LS CONTESSA Rims will not turn without hitting the 7.5 Lockheed disc callipers on my car. Are there small spacers required or do you have to skim some metal off the back of the rim. I have seen these wells fitted to a few cars with 7.5 discs. KaKa skim |
|
| Author: | poeee [ Sat Apr 28, 2007 11:43 am ] |
| Post subject: | |
As far as I know they shouldn't be hitting.
|
|
| Author: | doogie [ Sat Apr 28, 2007 12:25 pm ] |
| Post subject: | |
If they are the narrow offset contessa's they will touch the caliper, the easiest fix is to gring a small amount off the caliper so they will clear. Doogie |
|
| Author: | kaka [ Sat Apr 28, 2007 6:34 pm ] |
| Post subject: | |
Hey, Skimmed a mil off the callipers and the wheels are a goer. Many Thanks |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|