Dylan's Clubby wrote:
ill give that a wang
I've gotta remember that one
| ausmini https://www.ausmini.com/forums/ |
|
| what do you think about this? https://www.ausmini.com/forums/viewtopic.php?f=2&t=31220 |
Page 1 of 1 |
| Author: | Dylans Clubby [ Sat Apr 28, 2007 9:23 pm ] |
| Post subject: | what do you think about this? |
well im having alot of trouble with my motor, i'm getting lots of oil in cylinder 4 and i dont think its firing. its getitng awesome spark so thats not the problem. we've just put a reco'd head on. i was talking to a dude yesterday and he thinks the problem might be that a valve is either not seating properly or not closing and sealing. which would explain; a)oil in the cylinder b)the sound my car makes (think lawnmower...) c) the resultant lack in power from losing a cylinder im going to do a compression test, i'll report back when i've got the figures |
|
| Author: | brickworx [ Sat Apr 28, 2007 9:30 pm ] |
| Post subject: | |
Check tappet clearances then Do a dry comp test... then a wet test(pour a little oil in the bore) |
|
| Author: | Dylans Clubby [ Sat Apr 28, 2007 9:55 pm ] |
| Post subject: | |
cheers ill give that a wang |
|
| Author: | sgc [ Sat Apr 28, 2007 10:00 pm ] |
| Post subject: | |
Dylan's Clubby wrote: ill give that a wang
I've gotta remember that one
|
|
| Author: | Dylans Clubby [ Sat Apr 28, 2007 10:24 pm ] |
| Post subject: | |
yeah its a good one. remeber how everyuone gets pissed when their topics get spammed? i spam my own topics. interesting... |
|
| Author: | gafmo [ Sun Apr 29, 2007 8:30 am ] |
| Post subject: | |
Dylon...do the Bushies compression test...get some on to turn over the engine by the Ign with your thumb over the Spark plug hole...rather that waitingfor a tool...check each one seperatly of course. If they kick back similar...its not the head gasket...then check what the Rockers/valves are doing by rolling it in 4th gear could be a rocker also or clearance |
|
| Author: | Dylans Clubby [ Sun Apr 29, 2007 9:42 am ] |
| Post subject: | |
i've already got my hands on a tool...might as well use it  i was doing the bushies recently, i wasnt getting spark or something can't remember
better whip the rocker cover off again then! |
|
| Author: | lil-ute [ Sun Apr 29, 2007 4:20 pm ] |
| Post subject: | |
yep give that a wang |
|
| Author: | gafmo [ Sun Apr 29, 2007 6:06 pm ] |
| Post subject: | |
Any News Dylan |
|
| Author: | Mick [ Sun Apr 29, 2007 6:31 pm ] |
| Post subject: | |
What about the oil in the cylinder he spoke of? That might be a gasket leak or a ring? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|