ausmini
https://www.ausmini.com/forums/

Do you think these would fit an Ozzie MK1?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=31817		 Page 1 of 2
Author:  Wombat [ Wed May 16, 2007 1:51 pm ]
Post subject:  Do you think these would fit an Ozzie MK1?
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=170109787564&fromMakeTrack=true

They look right and the price is about ΒΌ - depends on shipping cost which I've asked for, but they say 1967-2000 and I want them for a 1963 MK1
Author:  sports850 [ Wed May 16, 2007 2:03 pm ]
Post subject: 
Best to ask the seller a question as the photo show's a mk 1ish door skin but the description suggests the later one with internal hinges which deifinitely won't fit . They may have used a generic photo of the wrong type .
Author:  simon k [ Wed May 16, 2007 2:05 pm ]
Post subject: 
yeah, what he said.... gotta be careful
Author:  Timbo [ Wed May 16, 2007 2:06 pm ]
Post subject: 
Don't think so, that picture doesn't match the description. The picture is of a Mk1 door but the description says 1967 to 2000. They don't seem to know what they're on about.

The ad also says they ship worldwide but won't ship outside the UK.:?: Shipping will be pretty steep.

Tim
Author:  dove grey 64 [ Wed May 16, 2007 2:27 pm ]
Post subject: 
wombat, just a warning. if your going to get skins from the uk, and your going to the hassle of postage etc, make sure you buy GENUINE panels. even if you spend another 50-100 bucks its worth it.
aftermarket ones are rubbish in my experiances. they dont have the proper curve and...*sigh* they just suck
Author:  Wombat [ Wed May 16, 2007 2:51 pm ]
Post subject: 
1970 mini K wrote:
wombat, just a warning. if your going to get skins from the uk, and your going to the hassle of postage etc, make sure you buy GENUINE panels. even if you spend another 50-100 bucks its worth it.
aftermarket ones are rubbish in my experiances. they dont have the proper curve and...*sigh* they just suck


NOTED :wink: Just looking at options at this stage ranging from skins to replaceing the whole door with good S/H ones in better condition than the ones I have.
Author:  dove grey 64 [ Wed May 16, 2007 2:55 pm ]
Post subject: 
what doors are you after?
Author:  Wombat [ Wed May 16, 2007 3:10 pm ]
Post subject: 
MK1 with sliding windows. Don't need the glass. Need to be relatively rust free under the window channel and 'blemish free' panels.
Author:  dove grey 64 [ Wed May 16, 2007 3:16 pm ]
Post subject: 
http://www.ausmini.com/forums/viewtopic.php?t=31806
mad mk1 has some.
also marcello has some too http://www.ausmini.com/forums/viewtopic.php?t=31750
if that fails, i know a place in morrabin has some for 220 a set. (not the best condition)
also i know a guy in geelong that has a few sets (not sure about condition) but you can give him a call too. pm me for his details.
quite a few to choose from
Author:  Wombat [ Wed May 16, 2007 3:36 pm ]
Post subject: 
Thanks for the leads - waiting on pics from Mad-Mk1 8)
Author:  dove grey 64 [ Wed May 16, 2007 3:50 pm ]
Post subject: 
Image
looks better then the ones that came with my car[/img]
Author:  Wombat [ Wed May 16, 2007 4:07 pm ]
Post subject: 
Yah - look good - waiting on some closeups :wink:
Author:  mad-mk1 [ Wed May 16, 2007 5:28 pm ]
Post subject: 
sorry mate forgot to get close ups, i had alook though, the door in the pic, has a few

raised kinds lines in it, and a smal rust hole,smaller than a 5 cent piece ut a inch and a bit below the bottom hinge
ill go get some pics in about 10

cheers
Author:  mad-mk1 [ Wed May 16, 2007 6:29 pm ]
Post subject: 
im baaaaack and have pics in ahnd!!!

here goes, tehy both have a wierd llike out dent in teh same spot :?

1 channel is in really good condition the otehr is not so good.

the pics tell the story

Image
Image
Image
Image
Image
Image
Image
Image

there you go
Author:  Wombat [ Wed May 16, 2007 8:45 pm ]
Post subject: 
Maybe I need to rethink :?

I was worried about this rust
Image

Image

This is the only damage to the skin

Image

Looking at the drivers door the only damage is a slight dent and the top hinge has a bolt in it instead of a pin. So I may as well save some money - they are better than I thought. Don't know why I got the idea I needed to reskin/replace :roll: :oops: :?
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/