ausmini
https://www.ausmini.com/forums/

Simple Electronic Ignition set up
https://www.ausmini.com/forums/viewtopic.php?f=2&t=31852		 Page 1 of 3
Author:  speedy [ Thu May 17, 2007 6:09 pm ]
Post subject:  Simple Electronic Ignition set up
Anybody used the following, plugs into the standard dizzy. Change over the button and redo the timing, presto, electronic ignition.

Image

Image
Author:  Hanra [ Thu May 17, 2007 6:30 pm ]
Post subject: 
Thats all my Petronix kit is, mount the module to the base plate, fit a magnetic pickup on the shaft, refit the button. All done. 2 wires to pos/neg on coil.
Author:  speedy [ Thu May 17, 2007 6:34 pm ]
Post subject: 
8) , I thought there was more to it. This one just requires the module to be fitted along with the button that comes as part of the kit.
Author:  Hanra [ Thu May 17, 2007 6:38 pm ]
Post subject: 
Nope, it dosnt get any easier! Its just a magnetic pickup on the shaft, and the module which amplifies the magnetic pulse into a square wave of some sort, then this supplys a gnd to the coil to discharge it, to generate the back EMF into the secondary winding of the coil to generate HT.
Author:  speedy [ Thu May 17, 2007 6:44 pm ]
Post subject: 
Out of curiosity, how much does the Petronix one retail for?
Author:  willy [ Thu May 17, 2007 6:45 pm ]
Post subject: 
$185
Author:  Hanra [ Thu May 17, 2007 6:47 pm ]
Post subject: 
I got mine from the US for 70 USD. inc frieght. It fitted my 29D Lucas Dizzy!
Author:  willy [ Thu May 17, 2007 6:48 pm ]
Post subject: 
New? :shock:

Where from?
Author:  Hanra [ Thu May 17, 2007 6:50 pm ]
Post subject: 
Yeah brand spanking, LU-142A. Gimmie a sec n ill see if i can find a docket.
Author:  Hanra [ Thu May 17, 2007 6:58 pm ]
Post subject: 
http://www.warehouseautoparts.com/store/page29.html

LU-142A $63.95 plus freight.
Author:  willy [ Thu May 17, 2007 7:03 pm ]
Post subject: 
Crikeys!
Out comes the credit card 8)
Author:  Blokeinamoke [ Thu May 17, 2007 7:18 pm ]
Post subject: 
Your nails are putrid
Author:  drmini in aust [ Thu May 17, 2007 7:29 pm ]
Post subject: 
I got mine from here a while back-
http://www.vintageperformance.com/retro ... /lucas.htm
:wink:
Author:  gerg [ Thu May 17, 2007 8:41 pm ]
Post subject: 
I Brought one from John at the mini king yesterday, and his mech, Glen, is going to fit it on saturday morning, he has been running it in his van for a couple of weeks and he loves it.... :D
Author:  Gilly [ Thu May 17, 2007 8:41 pm ]
Post subject: 
How much is the postage for the item if you can recall?
Page 1 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/