NO.
been there, done that...
These Mini nuts are shorter than the normal castellated type which are also of inferior material. Get some from a Mini place.
| ausmini https://www.ausmini.com/forums/ |
|
| BIG NUTS https://www.ausmini.com/forums/viewtopic.php?f=2&t=31885 |
Page 1 of 1 |
| Author: | mini-dunger [ Fri May 18, 2007 7:05 pm ] |
| Post subject: | BIG NUTS |
Hi guys, I just got my load of stuff from Karcraft and my CV's dont have any nuts. If I just roll up at motor traders do you think they can hook me up? Cheers Michael |
|
| Author: | drmini in aust [ Fri May 18, 2007 7:10 pm ] |
| Post subject: | |
NO. been there, done that...
These Mini nuts are shorter than the normal castellated type which are also of inferior material. Get some from a Mini place.
|
|
| Author: | Morris 1100 [ Fri May 18, 2007 8:13 pm ] |
| Post subject: | |
Did the CVs come with new circlips for the driveshafts? If not, get new ones.
|
|
| Author: | mini-dunger [ Fri May 18, 2007 10:46 pm ] |
| Post subject: | cv's |
yeah it came with, boots,grease,boot clamps,new circlip. I was very surprised with Karcraft it only took em 3 days to COD 500 bucks worth of gear. Considering I live about 45mins from a large mini supplier a 3 day wait was pretty sweet. I think the above mentioned mob sells nuts for about 5 bux |
|
| Author: | drmini in aust [ Sat May 19, 2007 7:17 am ] |
| Post subject: | |
I once got some standard castellated nuts and machined the back, so they would fit the C/V. But the nuts were crap material, (grade 4 maybe) and stretched the nut threads when torqued up. I binned em. It pays to buy the right ones.
|
|
| Author: | justminis [ Sat May 19, 2007 8:08 am ] |
| Post subject: | |
Get new tapered washers (collar) too if you haven't already. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|